Table of Contents
Advertisement
C
2
HAPTER
H
I
ARDWARE
NSTALLATION
2.1 Installing the Wall Mount Kit
The camera comes with a camera stand, which uses a swivel ball screw head to lock to the camera's
screw hole. When the camera stand is attached, you can place the camera anywhere by mounting the
camera through the three screw holes located in the base of the camera stand.
The Camera Stand
2.2 Connecting the Camera to LAN/WLAN
Use the provided Ethernet cable to
connect the camera to your local
area network (LAN).
When you connect the AC power
adapter, the camera is powered on
automatically. You can verify the
power status from the Power LED
on the front panel of the camera.
Once connected, the Link LED
starts flashing green light and the
camera is on standby and ready
for use now.
Advertisement
Table of Contents
