Package Contents Wireless N MPEG4 Network Camera • Power Adapter • Camera Stand Accessory Kit • Cat. 5 Ethernet Cable • Quick Installation Guide • Installation CD • Section 1 This Quick Installation Guide only provides basic instructions. For detailed information on using this product, please refer to the User’s Manual on the supplied CD.
Section 2 Connecting the Camera Step 1 Connect the power adapter to the Internet Camera and plug the power adapter to power outlet. When the camera is ready, the Power LED will be lit. Step 2A If your router has a built in Easy Setup Button (WPS button), you can easily build the wireless connection between your router and the camera.
Page 4
Step 2B Connect the Internet Camera to your network by attached the network cable from the switch/router to the LAN port of the Internet Camera. Step 3 Insert the provided CD into your computer’s CD ROM drive. The “autorun.exe” program should be executed automatically. If not, run “autorun.exe”...
Page 5
Step 5 Follow the on screen instructions to install the Setup Wizard. Step 6 After the installation finished, the ConnectSky Setup Wizard will launch up. If not, double click on the icon on your desktop:...
Page 6
Step 7 Click on Search Camera to show the camera(s) connected to your network. If you do not see any camera in the list, try Step 2 again. Step 8 Select the camera you wish to view/configure and click Browse Camera via Web.
Page 7
Note: By default, AIC600W uses dynamic IP address. If there is no DHCP server in your network or you prefer to use static IP address, you may click Configure Camera to change the IP settings. Step 9 Enter ‘admin’ for both user name and password.
Page 8
Step 11 Click on the white box to install ActiveX control in order to view the camera image. Step 12 You should now be able to view the image. If you did Step 2A, your camera has connected to you wireless network already, and you do not need any further configuration to start using your camera.
Page 9
Step 13 Click on WLAN on the top menu bar to enter the Wireless LAN page. Step 14 Follow the steps below: 1) Select the wireless network you wish to connect to 2) enter the wireless Key below if your wireless network is encrypted 3) click Apply.
Congratulations! The configuration is now complete. You can disconnect the Ethernet cable from the camera and move it to the desired location. You can monitor up to 16 cameras with the bundled software “ConnectSky™ Viewer” installed on your computer. Please refer to the User’s Manual for detailed instructions.