Table of Contents
Advertisement
Advanced Configuration Options
When you select Advanced Configuration Options, a screen similar to the figure
below appears. Do not change these options unless absolutely necessary.
Configuration
SCSI Bus Interface Definitions
Reset SCSI BUS at IC Initialization .............................................................. Enabled
Display <Ctrl-A> Message During BIOS Initialization .................................... Enabled
Extended BIOS Translation for DOS Drives > 1Gbyte .................................. Enabled
Verbose/Silent Mode..................................................................................... Verbose
Additional Options
--------------Options Listed Below Have NO EFFECT if the BIOS is Disabled--------------
Host Adapter BIOS ....................................................................................... Enabled
Support Removable Disks Under BIOS as Fixed Disks................................. Boot Only
BIOS Support for Bootable CD-ROM ............................................................ Enabled
BIOS Support for Int13 Extensions ............................................................... Enabled
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (
Figure 3-9 Advanced Configuration Options Screen
Use the cursor keys (
up menu with a selection of options. Use the cursor keys (
and press Enter to make your selection.
Altos 500 Series User's Guide
Adaptec AHA-3950U2B
AHA-3950U2B at Bus:Device 01:06h
Advanced Configuration Options
Host Adapter SCSI ID................................ 7
SCSI Parity Checking ................................ Enabled
Host Adapter SCSI Termination................. Low ON/High ON
Boot Device Options .................................. Press <Enter>
SCSI Device Configuration ........................ Press <Enter>
Advanced Configuration Options ............... Press <Enter>
<F6> - Reset to Host Adapter Defaults
) to move between options. Press Enter to display a pop-
SCSISelect (TM)
) to select an option,
Utility
=default)
*
Advertisement
Table of Contents
