Other Display Icons - Bushnell ImageView 118330 Instruction Manual

Bushnell binoculars instruction manual
Table of Contents

Advertisement

Power Frequency (60 or 50 Hz): This sets the correct electrical line frequency to avoid any visible
"flickering" in the images, especially when shooting video clips where fluorescent lighting is present.
The "60" setting should be used for operation in the United States. If you are using the camera in a
country with 50 Hz (cycle) AC power frequency, press SNAP to select "50" instead.
• Escape (ESC): Select ESC and press SNAP to exit the Setting menu options, and return to normal
mode.

OTHER DISPLAY ICONS

• Battery Indicator (
should plan to replace the batteries soon. Be sure to bring an extra set of batteries on a long trip or for
important events.
CAUTION: Make sure you download all photos (see directions in next section of manual) from the camera
before removing the batteries for longer than the time it takes to change them. The camera memory is volatile (power
dependant), and your photos may be lost if the batteries are removed for more than a minute or two (a temporary charge
will remain long enough to allow changing batteries), or if the batteries are left in but allowed to become completely
dead.
Attaching the Tripod (Included)
) : Shows the amount of battery life left. When half of the icon is filled in, you
SETUP MENU continued
Inserting the Remote Shutter Cable (Included)
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents