Removing The Lcd Module - Acer Aspire 4810TZ Series Service Manual

13. Carefully pry loose and remove the LED board from the upper case.
WARNING:The LED board is glued to the upper case, only remove the LED board if it is defective.

Removing the LCD Module

1. See "Removing the Battery Pack" on page 44.
2. See "Removing the Lower Cover" on page 45.
3. See "Removing the Lower Cover" on page 45.
4. See "Removing the Optical Drive Module" on page 46.
5. See "Removing the DIMM" on page 46.
6. See "Removing the Hard Disk Drive Module" on page 47.
7. See "Removing the SSD Module" on page 48.
8. See "Removing the RTC Battery" on page 48.
9. See "Removing the Keyboard" on page 51.
10. See "Removing the WLAN Board Module" on page 52.
11. See "Separating the Upper Case from the Lower Case" on page 53.
12. Release the wireless antenna cables from the latches.
Chapter 3 59