High Beams; Auto High Beams - Lincoln 2009 MKS Owner's Manual

High beams

Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.
Auto high beams (if equipped)
During nighttime driving, the automatic high beam system automatically
turns on your high beams if it is dark enough and no other traffic is
present. When it detects an approaching vehicle's headlights or a
preceding vehicle's tail lamps, the system turns off the high beams (low
beams remain on) before they distract other drivers.
If the vehicle is equipped with automatic high beams, the high beam
switch will operate differently depending on the status of the automatic
high beam system. Each of the possible operating scenarios are detailed
below:
Scenario 1:
Conditions - The automatic high beam system is set to ON in the
message center. The headlamp switch is in
automatic high beam system has turned the high beams on.
Operation - The high beam switch will not perform any function.
Scenario 2:
Conditions - The automatic high beam system is set to ON in the
message center. The headlamp switch is in
automatic high beam system has not turned the high beams on.
Operation - The high beam switch can be used to turn the high beams
on. They will then remain on until the switch has been returned to the
neutral position and the auto high beam system has turned the high
beams off.
Scenario 3:
Conditions - The automatic high beam system is set to ON in the
message center. The headlamp switch is in
or (on).
Lights
(auto lamps). The
(auto lamps). The
(off), (park lamps),
45