Front Turn Signal Lamps - GMC 2001 Safari Owner's Manual

8. Install the new bulb into the composite assembly by
turning it clockwise until it is completely tightened.
9. Reinstall the composite assembly by installing and
tightening all of the screws previously removed.
6-40
7. Turn the halogen
bulb counterclockwise
to remove it from
the assembly.

Front Turn Signal Lamps

1. Remove the two screws at the inside edge of the
parking/turn signal lamp assembly.
2. Remove the lamp assembly.
4. Pull the socket out of the lamp assembly.
5. Pull the bulb from the socket.
6. Gently push the new bulb into the socket.
7. Put the socket back into the lamp assembly and turn
it clockwise until it locks.
8. Put the parking/turn signal lamp assembly back into
the vehicle and tighten the screws.
3. Squeeze the tab on
the side of the lamp
socket while turning the
socket counterclockwise.