GMC 1999 Jimmy Owner's Manual page 322

5. Turn the bulb assembly counterclockwise to
remove it.
6. Put the new bulb assembly into the headlamp
assembly and turn it clockwise until it is tight.
7. Plug in the electrical connector.
8. Put the headlamp assembly back into the vehicle.
Install the two retaining clips.
6-36
One-Piece Front Turn Signal
Lamp Assembly
1. Remove the headlamp assembly as shown under
-
"One Piece Composite Headlamp System" earlier in
this section.
3. Pull the bulb straight out to remove it from the socket.
4. Push the new bulb into the socket until it snaps into place.
5. Put the bulb socket into the lamp assembly and turn
it clockwise until it is tight.
6. Put the headlamp assembly back into the vehicle.
Install the two retaining clips.
2. Twist the bulb socket to
remove it from the
headlamp assembly.
yellowblue