Setting The Clock; Without Date Display - Chevrolet Malibu 2010 Owner's Manual

Notice: Contact your dealer/retailer before adding
any equipment.
Adding audio or communication equipment could
interfere with the operation of the vehicle's engine,
radio, or other systems, and could damage them.
Follow federal rules covering mobile radio and
telephone equipment.
Notice: The chime signals related to safety belts,
parking brake, and other functions of your vehicle
operate through the radio/entertainment system.
If that equipment is replaced or additional equipment
is added to your vehicle, the chimes may not
work. Make sure that replacement or additional
equipment is compatible with your vehicle before
installing it. See Accessories and Modifications
on page 6-3.
The vehicle has Retained Accessory Power (RAP). With
RAP, the audio system can be played even after the
ignition is turned off. See Retained Accessory Power
(RAP) on page 3-23 for more information.

Setting the Clock

Without Date Display

AM/FM Base Radio with a Single
CD Player
To set the time:
1. Turn the ignition key to ACC/ACCESSORY or
ON/RUN. Press O to turn the radio on.
H
2. Press until the hour begins flashing on the
H
display. Press a second time and the minute
begins flashing on the display.
3. While either the hour or the minute numbers are
f
flashing, turn to increase or decrease the time.
H
4. Press again until the clock display stops flashing
to set the currently displayed time; otherwise, the
flashing stops after five seconds and the current
time displayed is automatically set.
To change the time default setting from 12 hour to
H
24 hour, press the button until 12H or 24H is displayed.
Once 12H or 24H is displayed, turn the
desired option to select the setting. Press the
again to apply the setting, or let the screen time out.
f
knob to the
H
button
4-53