Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
To replace one of these bulbs, do the following:
1. Open the trunk. See Hood Release on page 5-11
for more information.
5-50
A. Taillamp
B. Back-Up Lamp
C. Taillamp/Stoplamp/
Turn Signal Lamp
3. Pull back the trunk trim.
4. Remove the plastic wing nut.
5. Pull out the taillamp assembly and turn the bulb
socket one quarter turn counterclockwise.
2. Remove the two
fasteners located on
the inside of the
trunk at the rear of
the vehicle.