Vivotek AP-FHP-0105-R Quick Installation Manual

INTRODUCTION
Model Power Source Desc.
AP-FHP-0105-R DC
AP-FHP-0105-T DC
AP-FHP-0100-R PoE
PACKAGE CONTENTS
* 1x Quick Installation Guide
IMPORTANT:
1. Use CAT5e or CAT6 UTP/STP cables.
2. Please avoid using low quality cables, which will seriously limit the cabling distance and power delivery.
CONNECTION
95w PoE Injector
Network Switch
INSTALLATION
I/O Connection
AP-FHP-0105-R
DC jack to
56V adapter
Ethernet port to
Network switch
AP-FHP-0100-R
PoE port to
PoE switch
AP-FHP-0105-T
DC jack to
56V adapter
PoE port to
IP Camera
AP-FHP-0105-R/AP-FHP-0100-R/AP-FHP-0105-T
Hyper PoE Extender
Quick Installation Guide
Hyper PoE DC in Rx Module, 1x Hyper Port, 1x FE RJ45, 1 DC Jack,
Hyper PoE DC in Tx Module, 1x Hyper Port, 1x FE RJ45, 1 DC Jack, -20ﾟC~60ﾟC
Hyper PoE in Rx Module, 1x Hyper Port, 1x FE RJ45, -20ﾟC~60ﾟC
AP-FHP-0100-R
AP-FHP-0105-R
Hyper PoE
port to Tx
Hyper PoE
port to Tx
Hyper PoE
port to Rx
,
* 1x 56VDC/65W Power Adapter (AP-FHP-0105-R only)
AP-FHP-0105-T
AP-FHP-0105-T
Grounding
AP-FHP-0100-R
AP-FHP-0105-R AP-FHP-0105-T
Hyper PoE Link Cat.5e/6 pin assignment
5-8 Pin V+ ++++ ---- 1-4 Pin V-
-20ﾟC~60ﾟC
CAT 5 Cable
* Make sure the grounding
resistance is lower than
Ground screw
0.5Ω.