Download Print this page

EAW DX810 Specifications

8x10 digital mixer and signal processor
Hide thumbs Also See for DX810:

Advertisement

DESCRIPTION
EAW Commercial's DX810 is a DSP-based digital audio mixer and
signal processor. It is designed for use in a variety of installations such
as churches, courtrooms, convention centers, and hotels. It provides
eight balanced mic/line inputs and ten balanced outputs allowing
true 8x10 mixing.
Each of the eight mic/line input channels is accessed by means of
two Phoenix-type detachable connectors. Each input is optimized to
accept either mic or line-level signals. Microphone preamplifiers use
XDR™ technology to offer studio-grade audio performance. Phantom
power of 48 VDC is switchable individually on each mic input. Two
auxiliary line-level inputs with trim are provided. This allows analog
signals to be mixed with the A and B outputs. Master outputs provide
balanced line-level signals to Phoenix-type connectors.
Each of the ten outputs represents a discrete mix of the eight inputs,
resulting in a true 8x10 mixing matrix with virtual faders at each
crosspoint. Any combination of gain elements can be assigned to
one of 32 groups.
The DX810 offers an intuitive front panel user interface, consisting of
dual-function LED bar graph meters for each input and the A and B
outputs (all ten outputs can be monitored in the software interface).
Input meters indicate the presence of signal prior to any signal
processing (pre-fader). Output A and B meters indicate actual level
at the output (post-fader). Levels for Mix A and B are set by means
of UP/DOWN pushbuttons dedicated to each input and output. A
MODE button is used to select between Mix A and B. This allows
adjustment of levels to two mix outputs from the same set of input
controls. A third function of the MODE button allows the user to
LOCK the front panel controls until a security unlock code is entered.
Two independent RS232 connectors are provided, one on the front
panel and one on the rear. This allows for connection to a computer
or control system. A DB25 connector on the rear panel allows for
interfacing with the 10 Logic Inputs and 10 Logic Outputs. Logic I/O
enables hardware control and indication from custom control panels.
All logic inputs and outputs are programmable in software.
A proprietary remote control bus allows connection of the optional
DX wired remotes. These remotes can use a variety of three-
conductor cable. Remotes are available in Volume Control (DX-RVC)
and 4-switch versions (DX-SW4), and may be combined to provide
flexible configurations.
The DX810 is supplied with the DX-810-PC software that allows
access to all of the system's settings and configurations. The software
provides access to the three-band input EQ, eight-band parametric or
31-band graphic EQ for the outputs, compressors, gates, delays, and
crossover configuration. In addition, the software allows saving and
recalling up to 32 presets, configuration for 32 control groups, for
input force on/force off functions with priority, and for the logic input
and output connections. All settings and text labels are retained in
the DX810 as well as stored on the computer's local drive.
The DX810 is UL and CE approved and designed for continuous use
in professional fixed installation systems. An internal auto-ranging
power supply allows connection to mains voltages from 90-240 VAC
at 50/60 Hz. This requires no jumper or switch setting changes. A 24
VDC input is provided for applications where backup battery power
is required. Switchover to backup power is automatic and silent.
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
8X10 DIGITAL MIXER AND SIGNAL PROCESSOR
TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 1 of 5
Features
• 32-bit DSP and 24-bit Analog/Digital Conversion
• 8 balanced XDR™ Mic/Line inputs with trim
• 2 balanced Line inputs direct to mix buses A and B
• 10 Independent Mix Buses and balanced Outputs
• 2 unbalanced Record Outputs
• 8 unbalanced Direct Channel Outputs
• Individual Level/Peak (PPM) metering on Inputs and Outputs
• 2-band sweepable High and Low shelving EQ with a parametric
Mid control on each Input
• Gating on each Input
• Solo button on each Input
• 31-band Graphic EQ or 8-band Parametric EQ on each Output
• Fully variable Compressor on each Input and Output
• Variable delay on each Output
• Configurable crossover for up to five bands
• 10 Programmable Logic Inputs
• 10 Programmable Logic Outputs
• 2 independent RS-232 interface ports
• 48 VDC Phantom Power switch per input
• 24 VDC Backup Power input
• PC software application included
• Remote Mapping feature provides individual button
assignments for the DX-SW4 remote control
Applications
• Meeting Rooms
• Houses of Worship
• Courtrooms
• Multizone Paging/
Music Systems
DX810
• Hotels
• Boardrooms
• Multi-Purpose Facilities
Part No. 0009777 Rev. D 05/07

Advertisement

loading

Summary of Contents for EAW DX810

  • Page 1 All settings and text labels are retained in the DX810 as well as stored on the computer’s local drive. The DX810 is UL and CE approved and designed for continuous use in professional fixed installation systems. An internal auto-ranging power supply allows connection to mains voltages from 90-240 VAC at 50/60 Hz.
  • Page 2: Specifications

    DC Power: Phantom Power: Fuse Ratings: TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 2 of 5 DX810 ±15 dB 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 60, 200, 250, 315, 400, 500, 630, 800, 1 k, 1.25 k, 1.6 k, 2 k, 2.5 k, 3.15 k, 4 k, 5 k,...
  • Page 3 8X10 DIGITAL MIXER AND SIGNAL PROCESSOR DX-810-PC SOFTwARE The DX810 real-time DX-810-PC software application provides access to all of the DX810’s controls. The user interface employs a full-matrix mixer, making settings and operation clear and intuitive. The input, output, crosspoint, and group faders are visible at the same time, allowing immediate access to all level controls.
  • Page 4 Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404 TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 4 of 5 8X10 DIGITAL MIXER AND SIGNAL PROCESSOR DX810 Part No. 0009777 Rev. D 05/07...
  • Page 5 The following are “Part 2 Products” CSI-type specifications. It is assumed that “Part 1 General – Administrative and Procedures” and “Part 3 Execution – Installation and Maintenance” are part of an overall audio system or project specification. PART 2 PRODUCTS 2.01 Approved Manufacturer/Product EAW Commercial, One Main Street, Whitinsville, MA 01588 USA Model number: DX810 2.02 Design...