Access Control - Draytek Vigor 2910 User Manual

3 . 1 2 . 4 A c c e s
3 . 1 2 . 4 A c c e s
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights.
Enable Access Control
Policy
MAC Address Filter
Attribute
Add
Delete
Edit
Cancel
158
s C o n t r o l
s C o n t r o l
Select to enable the MAC Address access control feature.
Select to enable any one of the following policy. Choose
Activate MAC address filter to type in the MAC
addresses for other clients in the network manually.
Choose Isolate WLAN from LAN will separate all the
WLAN stations from LAN based on the MAC Address
list.
Display all MAC addresses that are edited before. Four
buttons (Add, Remove,
Client's MAC Address
address of wireless client.
s - select to isolate the wireless connection of the wireless
client of the MAC address from LAN.
Add a new MAC address into the list.
Delete the selected MAC address in the list.
Edit the selected MAC address in the list.
Give up the access control set up.
Manually enter the MAC
-
Vigor2910 Series User's Guide