Amplifier Operation
Selecting the component
1
Rotate INPUT SELECTOR to select the
input.
The selected input appears in the display.
To select the
Display
VCR
VIDEO 1, VIDEO 2,
VIDEO 3 or
VIDEO 4
Camcorder or TV game VIDEO 5
LD player
LD
DVD player
DVD
Satellite tuner
TV/SAT
Tape deck
TAPE
MD or DAT deck
MD/DAT
CD or Super Audio CD
CD/SACD
player
Built-in tuner
FM or AM and
frequency
Turntable
PHONO
i.LINK component*
i.LINK
* See “Note when “i.LINK” is selected” below.
2
Turn on the component and start
playback.
3
Rotate MASTER VOLUME to adjust the
volume.
Note when “i.LINK” is selected
When “i.POWER” is set to “AUTO” (page 41), the
power of the i.LINK circuits turns on after “i.LINK” is
selected, and “i.LINK Connecting” appears in the
display while the power of the i.LINK circuits is
turning on. While this message appears, no sound is
output because LINC is not established. (See page 57
for details on LINC.)
Make sure to control the player after “i.LINK
Connecting” turns off.
The connected i.LINK component name appears
except in the following cases.
“No LINC” : No i.LINK component is connected when
“i.LINK” is selected.
“Disc”: The receiver could obtain only general
information from the connected component.
“Unknown”: The receiver could not obtain information
from the connected component.