Delphi SA10116-11B1 Quick Manual

Setting Up the Transmitter
Note: Your Delphi XM Satellite Radio Signal
Repeater transmitter should be placed in a location
that allows for connection to a properly placed XM
home antenna (i.e., near a south-facing window).
See your satellite radio receiver user guide for
more information on locating a suitable location
for the antenna.
1. Connect your home antenna
and the A/C power adaptor that
came with your Delphi XM
Satellite Radio Signal Repeater in
the appropriate jacks at the back
of the transmitter. You should
see a blue light on the front when the A/C power adaptor is plugged in, and
a second blue light when the antenna is connected.
2. Start by rotating the antenna to a vertical position. If necessary, adjust it
to ensure the strongest signal is transmitted to the repeater antenna.
3. Make sure the PWR OUT switch on the back is set to the right-hand
(maximum) setting to start. See your user guide for more information
on this function.
4. Your transmitter may rest flat on a horizontal surface, or it may be
wall-mounted. See your user guide for more information.
white logo
Delphi Corporation
1441 West Long Lake Road • Troy, Michigan 48098-5090 U.S.A.
Customer Service/Technical Support: [1] 877.GO DELPHI
www.delphi.com
www.shopdelphi.com
XM, SKYFi, and Roady are trademarks of XM Satellite Radio Inc.
white logo
MyFi is a trademark of Delphi Corporation.
© 2005 Delphi Corporation. All rights reserved.
DPSS-05-E-024
color logo
color logo
white logo
Delphi XM Satellite Radio
Signal Repeater Quick Guide
For Use With Any Delphi XM Satellite
Radio Unit Home Kit or Audio System
SA10116-11B1
white logo
white logo
Caution: The Delphi XM Satellite Radio Signal Repeater operates on a 900 MHz
frequency and may cause interference with other wireless equipment. For best
results, do not operate the Delphi XM Satellite Radio Signal Repeater in the vicinity
of other equipment operating at this frequency.
Caution:
This quick guide and your user manual contain important safety and
operating information. Please read and follow the instructions in both. Failure to do
so could result in damage to your audio system, your home, and/or other property.
co
co
co