Setting Up And Using Your Computer; Setting Up A Printer; Printer Cable; Connecting A Parallel Printer - Dell Dimension 2400 Series Owner's Manual

Setting Up and Using Your Computer

Setting Up a Printer

NOTICE:
Complete the operating system setup before you connect a printer to the computer.
See the documentation that came with the printer for setup information, including how to:
• Obtain and install updated drivers.
• Connect the printer to the computer.
• Load paper and install the toner or ink cartridge.
• Contact the printer manufacturer for technical assistance.

Printer Cable

Your printer connects to your computer with either a USB cable or a parallel cable. Your printer may
not come with a printer cable, so if you purchase a cable separately, ensure that it is compatible
with your printer. If you purchased a printer cable at the same time you purchased your computer,
the cable may arrive in the computer box.

Connecting a Parallel Printer

1
Complete the operating system setup, if you have not already done so.
2
Shut down the computer through the Start menu (see page 18).
NOTICE:
For best results, use a 3-m (10-ft) or shorter parallel cable.
Attach the parallel printer cable to the parallel connector on the computer and tighten the two
screws. Attach the cable to the connector on the printer and snap the two clips into the two
notches.
Setting Up and Using Your Computer
11