D-Link AirPlus G DWL-G630 Quick Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Adapter
  5. DWL-G630 - AirPlus G 802.11g Wireless PC...
  6. Quick installation manual
D-Link AirPlus G DWL-G630 Quick Installation Manual

D-Link AirPlus G DWL-G630 Quick Installation Manual

2.4ghz wireless cardbus adapter
Hide thumbs Also See for AirPlus G DWL-G630:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual, Quick Installation Manual
This product works with the following operating
Windows XP, Windows
system software:
2000, Windows Me, Windows 98SE

Before You Begin

You must have at least the following:
•
A laptop computer with an available 32-bit Cardbus slot
•
At least a 300 MHz processor and 32MB of memory
•
Cardbus Controller properly installed and working in the laptop computer
•
An 802.11g or 802.11b Access Point (for Infrastructure Mode) or another
802.11g or 802.11b wireless adapter (for Ad-Hoc; Peer-to-Peer networking
mode.)
Check Your Package Contents
These are the items included with your DWL-G630 purchase:
If any of the above items are missing, please contact your reseller.
Insert the D-Link CD-ROM Into Your
Computer
Turn on the computer
Insert
the
D- Link AirPlus G DWL-G630
Driver CD in the CD-ROM drive.
The step-by-step instructions that follow are shown
in Windows XP. The steps and screens are similar
for the other Windows operating systems
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
DWL-G630 AirPlus G 2.4GHz Wireless Cardbus
Adapter
CD-ROM (containing Drivers, Manual and Warranty)
and
TM
specifications subject to change without notice. DWL-G630 v1.00
Wireless Cardbus Adapter
TM
Cardbus Adapter into
your computer before
installing the driver
software from the
D-Link CD!
1
DWL-G630
TM
AirPlus G 2.4GHz
Do
NOT
install
the DWL-G630

Advertisement

Table of Contents
loading

Related Manuals for D-Link AirPlus G DWL-G630

Summary of Contents for D-Link AirPlus G DWL-G630

  • Page 1: Before You Begin

    Windows XP. The steps and screens are similar for the other Windows operating systems ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-G630 v1.00 DWL-G630 AirPlus G 2.4GHz...

  • Page 2: Your Computer

    Continued... Click Install Drivers If the CD Autorun function does not automatically start on your computer, type “D:\Drivers\setup.exe.” If it does start, proceed to the next screen. Click Next Click Next Select No I will restart my computer later Click Finish Shut down your computer...
  • Page 3 Make sure to turn off the laptop computer. Locate the cardbus slot on your laptop computer. Gently insert the DWL-G630 into the cardbus slot in your laptop computer (as shown.) 32-bit connector This is the connector that fits...

  • Page 4: Restart Your Computer

    Restart Your Computer When you restart your computer this Found New Hardware Wizard (Windows XP) may appear: Select Install the software automatically (Recommended) Click Next For Windows XP: This Installation alert screen will appear. Click Continue Anyway Click Finish to finalize the installation.
  • Page 5 Your Installation is Complete! After you’ve continued in Windows XP, 2000, Me, or 98SE, the D-Link AirPlus G DWL-G630 Configuration Utility will automatically start and the utility icon will appear in the bottom right hand corner of the desktop screen (systray). If this...
  • Page 6 Appendix (Cont.) Uncheck “Use Windows to configure my wireless net- work settings.” Click...

  • Page 7: Using The Configuration Utility

    SSID setting is set to default. Link Quality / Signal Strength: Displays the Link Quality for the DWL-G630 wireless connec- tion to the access point. The Signal Strength represents the wireless signal between the access point and the DWL-G630. The percentage coincides with the graphical bar.
  • Page 8 Router or Access Point. Channel: By default, the channel is set to 6. Channel selection is automatically adjusted by the DWL-G630 depending on the channel setting of the access point selected for association. To change the channel settings, the Wireless Mode must be set to Ad-hoc.

  • Page 9: Ip Address Configuration

    IP Address Configuration To connect to a network, make sure the proper network settings are configured for DWL-G630. Microsoft Windows XP: Go to Start > right click on My Network Places > select Properties > Double-click on the Network Connection associated with the DWL-G630.

  • Page 10: For Windows 2000 Users

    For Windows 2000 users: Go to Start > Settings > Dial-up Connections > Double-click on Local Area Connection with the DWL-G630 > select Click Internet Protocol (TCP/IP) Click Properties Dynamic IP address setup Used when a DHCP server the local network. (i.e. Router)
  • Page 11 Notes...
  • Page 12 T T T T T echni You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product.

Table of Contents