Advertisement
Quick Links
Download this manual
See also:
User Manual
This product can be set up
using Internet Explorer 6.x
or above
Before You Begin
You must have at least the following:
• Windows 98/Me/2000/XP
• A CD-ROM drive
• An available Ethernet connection
Check Your Package Contents
These are the items included with your purchase:
If any of the below items are missing, please contact your reseller.
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications subject to change without notice. DCS-2100G.11112004
DCS-2100G Internet Camera with Stand
CD-ROM with Manual and Installation Wizard
Antenna
CAT5 Ethernet Cable
5V AC Power Adapter
DCS-2100G
SECURICAM Network
802.11g Wireless
Internet Camera
Using a power supply
with a different voltage
rating will damage this
product and void the warranty.
Advertisement
Related Manuals for D-Link SECURICAM DCS-2100G
Summary of Contents for D-Link SECURICAM DCS-2100G
-
Page 1: Before You Begin
CD-ROM with Manual and Installation Wizard Antenna CAT5 Ethernet Cable 5V AC Power Adapter ©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DCS-2100G.11112004 DCS-2100G SECURICAM Network 802.11g Wireless... -
Page 2: System Requirements
System Requirements • Internet Explorer 6.x or above • CPU: 800MHz or above • Memory Size: 128MB (256MB recommended) • VGA card resolution: 800x600 or above Note: If using multiple cameras for viewing/recording, the minimum requirements are a 2GHz or above CPU with 512MB memory and a 32MB video card. Hardware Installation Connect the Ethernet Cable Connect an Ethernet cable to the Ethernet connector located... - Page 3 Installing the Installation Wizard Insert the DCS-2100G CD into the CD-ROM drive. Click on Install Software Click on Installation Wizard Click Next...
- Page 4 Installing the Installation Wizard (continued) Click Next Click Next Click Finish...
- Page 5 The software will search for cameras. The Installation Wizard will appear show the MAC address of the DCS-2100G and an IP Address. If you have a DHCP* server on your network, there will be a valid IP Address displayed here, indicated by a “Yes”...
- Page 6 Configuring Your Camera with the Installation Wizard (continued) If the Installation Wizard does not detect any devices, you will need to reset the camera. Press down on the reset button on the back panel of the camera for 2 cycles (the LED will flash green continuously and stop twice).
- Page 7 Configuring Your Camera with the Installation Wizard (continued) Click the Setup button Enter an administrative password in the Root password and Confirm password fields. Click the Next button For details on the Date/Time Settings, please refer to the User Manual on the CD-ROM.
- Page 8 Configuring Your Camera with the Installation Wizard (continued) Uncheck the box labeled Reset IP address at next boot Click the Next button If you need to modify the IP settings, please refer to the user manual on the CD-ROM. Click the Apply button...
- Page 9 Configuring Your Camera with the Installation Wizard (continued) After the settings have been saved, the Done button will appear. Click the Done button Click the button labeled Link to Selected Device(s)
-
Page 10: Viewing Your Internet Camera
Installation Wizard will automatically open your Web browser to the IP address of the DCS-2100G, in this example it is: http://192.168.0.120.Your DCS-2100G may have a different IP Address. The installation and configuration of the DCS-2100G Internet Camera is now complete. - Page 11 Notes...
- Page 12 You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone.