Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

D-link DI-604 Installation Manual

D-link di-604: installation guide.

 
This product can be set up using any current
web browser, i.e., Internet Explorer 5x,
Netscape Navigator 4x.
Before You Begin
1. If you purchased this router to share your high-speed Internet connection with
other computers, you must have either an Ethernet-based Cable or a DSL modem
with an established Internet account from an Internet Service Provider (ISP).
2. It's best to use the same computer that is connected to your modem for
configuring the DI-604 router. The DI-604 Router acts as a DHCP server and will
assign all the necessary IP address information on your network. See Appendix
at the end of this Quick Installation Guide or the Manual on the CD-ROM for
setting each network adapter to automatically obtain an IP address.
Check Your Package Contents
These are the items included with your DI-604 purchase:
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective
holders. Software and specifications subject to change without notice. DI-604.05082002
• DI-604 Ethernet Broadband Router
• CD-ROM (containing Manual and Warranty)
• Ethernet (CAT5 UTP/Straight-Through) Cable
• 5V DC, 2A Power Adapter
DI-604
Express EtherNetwork™
Broadband Router
Using a power
supply with a
different voltage rating
will damage and void
the warranty for this
product.

Summary of Contents

  • Page 1

    These are the items included with your DI-604 purchase: If any of the above items are missing, please contact your reseller. ©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DI-604.05082002 •...

  • Page 2

    First, connect the power adapter to the receptor at the back panel of the DI-604 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.

  • Page 3

    Using additional Ethernet (CAT5 UTP/Straight-Through) cables, connect your Ethernet-equipped computer(s) to one of the 3 remaining Ethernet LAN ports on the back panel of the DI-604. When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this:...

  • Page 4

    Using The Setup Wizard Open your Web browser and type “http://192.168.0.1” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type “admin” for the username and leave the password field blank. Click Once you have logged in, the...

  • Page 5

    You will see the following screens. Click Next Step 1 - Set up your new password. You have the option to establish a password. Click Next Step 2 - Choose your time zone. Click Next...

  • Page 6

    The Setup Wizard (continued) Select the type of Internet connection for your router. Select one of these settings Click Next If you selected Dynamic IP Address, this screen will appear: Click the “Clone MAC Address” button to automatically copy the MAC address of the network adapter in your computer.

  • Page 7

    If your ISP requires a Static IP Address, and this option is selected, then this screen will appear: Enter the IP address information originally provided to you by your ISP. You will need to complete all the required fields. Click Next If your ISP uses PPPoE...

  • Page 8

    Your Setup is Complete! Click Restart Click Close You will be returned to the Home tab.

  • Page 9

    Test Your Internet Connection Click Exit Relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection. For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management interface;...

  • Page 10

    Here’s how to configure the network adapter to obtain an IP address automatically for the DI-604 Broadband Router. Microsoft Windows XP: Go to Start > right click on My Network Places >...

  • Page 11

    Apple Macintosh OS X: Go to the Apple Menu and Select System Preferences. Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Configure pull- down menu Click on Apply Now The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address will appear.

  • Page 12

    Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: