VTech LS6002 User Manual

Go to www.vtechphones.com
to register your product for
enhanced warranty support and
latest VTech product news.
DECT 6.0 accessory handset
User's manual
Display icons overview
The battery icon flashes when the
battery is low and needs charging.
The battery icon animates when the
battery is charging.
The battery icon becomes solid when
the battery is fully charged.
ECO The ECO mode activates
automatically to reduce power
consumption when the handset is
within range from the telephone base.
There are new voicemail received
from your telephone service provider.
• On when the home line is in use
or there is an incoming home call.
• Flashes when there is an
incoming home waiting call.
1 There are Bluetooth devices
connected on the cell devices list.
2
• On when the cell line is in use or
there is an incoming cell call.
• Flashes when there is an
incoming cell waiting call.
Connect and charge the battery
NEW There are new caller ID log entries.
ANS ON The answering system is turned on.
The handset ringer is off.
The message number currently
Connect the charger
1/13
playing and total number of new/old
messages recorded.
Install the battery
Install the battery as shown.
• Use only the supplied battery.
• If the handset will not be used for a long
time, disconnect and remove the battery
to prevent possible leakage.
• To purchase a replacement battery, visit
our website at www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or call
1 (800) 267-7377.
Congratulations
on purchasing your new VTech product. Before
using this telephone, please read Important
safety instructions.
LS6002
This manual has instructions on how to set up
and register your new handset. For instructions
LS6002-13
on using the handset, see the Abridged user's
manual that came with your telephone base.
LS6002-15
You may also view or download the online
LS6002-16
user's manual for a full set of installation and
operation instructions at
LS6002-17
www.vtechphones.com. In Canada, visit
www.vtechcanada.com.
for use with Telephones identified with this
Compatible with
Hearing Aid T-Coil logo have reduced noise and
VTech model LS6181
interference when used with most
T-coil equipped hearing aids and
cochlear implants. The TIA-1083
Compliant Logo is a trademark of
T
the Telecommunications Industry
Association. Used under license.
TIA-1083
BC
Charge the battery
3
2
Once you have installed the battery, the handset
LCD display indicates the battery status (see the
table below).
THIS SIDE UP
• For best performance, keep the handset
in the telephone base or charger when
not in use.
1
• The battery is fully charged after 11 hours
of continuous charging.
Battery
indicators
The screen
is blank, or
displays Put in
• Use only the adaptor provided.
charger and
• Charge the battery provided with or
flashes.
identified for use with this product only
in accordance with the instructions and
The screen
limitations specified in this manual.
displays
Low battery
and flashes.
The screen
displays
HANDSET X.
Before use
Add and register a handset
You can add new LS6002 handsets (purchased
separately) to your LS6181 telephone system.
Your LS6181 telephone system supports a
maximum of five handsets.
Register each handset with the LS6181
telephone base before use. After charged,
each expansion handset alternately displays To
register HS... and ...see manual.
Charge the new handset without interruption
for at least 30 minutes before registering it to
the telephone base.
Parts checklist
Your telephone package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
®
The ENERGY STAR program
(www.energystar.gov)
recognizes and encourages
the use of products that save
energy and help protect our
environment. We are proud
to mark this product with
®
the ENERGY STAR label
indicating it meets the latest
energy efficiency guidelines.
Charger overview
a
1 – Charging pole
2 – CHARGE light
To register a handset:
1. Press and hold /FIND HANDSET at the
telephone base for about four seconds until
the IN USE light turns on.
2. Press on the cordless handset. Then it
shows Registering...
The cordless handset show Registered and
you hear a beep when the registration process
completes. The registration process takes about
60 seconds to complete.
Deregister handsets
To replace a handset or reassign the designated
handset number of a registered handset, you
must deregister all handsets, and then register
each handset individually.
Battery status Action
To deregister all handsets:
The battery has Charge without
1. Press and hold /FIND HANDSET at the
no or very little interruption
telephone base for about 10 seconds until the
charge. The (at least 30
IN USE light flashes.
handset cannot minutes).
be used. 2. Immediately press /FIND HANDSET again.
You hear a confirmation tone.
The battery has Charge without
All handsets alternately show To register HS...
enough charge interruption
and ...see manual when the deregistration
to be used for a (about 30
process completes. The deregistration process
short time. minutes).
takes about 10 seconds to complete.
The battery is To keep the
charged. battery charged,
Operating range
place it in the
This cordless telephone operates with the
telephone base
maximum power allowed by the Federal
or charger when
not in use. Communications Commission (FCC). Even
so, this handset and telephone base can
communicate over only a certain distance - which
can vary with the locations of the telephone base
and handset, the weather, and the layout of your
home or office.
When the handset is out of range, the handset
displays Out of range or no pwr at base.
If there is a call while the handset is out of range,
it may not ring. Even if it rings, the call may not
connect well when you press
closer to the telephone base, then press
to answer the call.
If the handset moves out of range during
a telephone conversation, there may be
interference. To improve reception, move closer
to the telephone base.
Handset overview
a
r
q
p
o
n
g
m
l h
k
i
j
s
User's manual
1 – Handset earpiece
2 – LCD display
3 – /p/VOLUME
• Review the directory when the phone is not in use.
• Scroll up while in a menu, or in the directory, caller
ID log or redial list.
• Move the cursor to the right when entering
numbers or names.
• Increase the listening volume during a call or
message playback.
4 – MENU/SELECT
• Show the menu.
• While in a menu, press to select an item or save
an entry or setting.
b
5 – OFF/CANCEL
• Hang up a call.
• Return to the previous menu or idle mode without
making changes.
• Delete digits while predialing.
ECO mode
This power conserving technology reduces power
consumption for optimal battery performance.
The ECO mode activates automatically whenever
the handset is synchronized with the telephone
base.
General product care
LS6181
telephone base Taking care of your telephone
Your cordless telephone contains sophisticated
electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original
packing materials to protect your telephone if you
ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet.
Do not use the handset outdoors in the rain,
or handle it with wet hands. Do not install the
telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power
surges harmful to electronic equipment. For your
own safety, take caution when using electrical
appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that
should retain its luster for many years. Clean it
only with a dry non-abrasive cloth. Do not use
dampened cloth or cleaning solvents of any kind.
Important safety instructions
When using your telephone equipment, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and injury, including the
following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on
the product.
3. Unplug this product from the wall outlet before
cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
4. Do not use this product near water such as
near a bath tub, wash bowl, kitchen sink,
or . Move
laundry tub or a swimming pool, or in a wet
or
basement or shower.
5. Do not place this product on an unstable table,
shelf, stand or other unstable surfaces.
6. Slots and openings in the back or bottom of the
telephone base and handset are provided for
ventilation. To protect them from overheating,
these openings must not be blocked by placing
the product on a soft surface such as a bed,
• Silence the handset ringer temporarily while the
phone is ringing.
• Erase the missed call indicator while the handset
is not in use.
6 – Charging pole
7 – 0/oper
• Enter space character during text editing.
8 –
• Show other dialing options when reviewing a caller
b
ID log entry.
• Set and turn on the quiet mode, or turn it off.
c
d
9 – MUTE/DELETE
e
• Mute the microphone during a call.
f • Silence the handset ringer temporarily while the
phone is ringing.
• Delete the displayed entry while reviewing the
directory, caller ID log or redial list.
• Delete digits while predialing.
10 – Battery compartment cover
11 – Microphone
12 – REDIAL/PAUSE
• Review the redial list.
• Insert a dialing pause.
13 –
• Make a home call using the handset
speakerphone.
• Answer a call using the handset speakerphone.
• Switch between the speakerphone and the
handset earpiece.
14 –
• Switch to tone dialing temporarily during a call.
15 – 1
• Press repeatedly to add or remove 1 in front of
the caller ID log entry before dialing or saving it
to the directory.
• Set or dial your voicemail number.
16 – CID/q/VOLUME
• Review the caller ID log when the phone is not
in use.
• Scroll down while in a menu, or in the directory,
caller ID log or redial list.
• Move the cursor to the left when entering
numbers or names.
• Decrease the listening volume during a call or
message playback.
17 –
• Make or answer a home call.
• Answer an incoming home call when you hear a
call waiting alert.
18 –
• Make or answer a cell call.
• Answer an incoming cell call when you hear a
call waiting alert.
19 – Handset speakerphone
sofa or rug. This product should never be
placed near or over a radiator or heat register.
This product should not be placed in any area
where proper ventilation is not provided.
7. This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply in your home or office, consult your
dealer or local power company.
8. Do not allow anything to rest on the power cord.
Do not install this product where the cord may
be walked on.
9. Never push objects of any kind into this product
through the slots in the telephone base or
handset because they may touch dangerous
voltage points or create a short circuit. Never
spill liquid of any kind on the product.
10. To reduce the risk of electric shock, do not
disassemble this product, but take it to an
authorized service facility. Opening or removing
parts of the telephone base or handset other
than specified access doors may expose you
to dangerous voltages or other risks. Incorrect
reassembling can cause electric shock when
the product is subsequently used.
11. Do not overload wall outlets and extension
cords.
12. Unplug this product from the wall outlet and
refer servicing to an authorized service facility
under the following conditions:
• When the power supply cord or plug is
damaged or frayed.
• If liquid has been spilled onto the product.
• If the product has been exposed to rain or
water.
• If the product does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by the
operation instructions. Improper adjustment
of other controls may result in damage
and often requires extensive work by an
authorized technician to restore the product
to normal operation.
• If the product has been dropped and the
telephone base and/or handset has been
damaged.
• If the product exhibits a distinct change in
performance.
13. Avoid using a telephone (other than cordless)
during an electrical storm. There is a remote
risk of electric shock from lightning.
14. Do not use the telephone to report a gas
leak in the vicinity of the leak. Under certain
circumstances, a spark may be created
when the adapter is plugged into the power
outlet, or when the handset is replaced in its
cradle. This is a common event associated
with the closing of any electrical circuit. The
user should not plug the phone into a power
outlet, and should not put a charged handset
into the cradle, if the phone is located in an
environment containing concentrations of
flammable or flame-supporting gases, unless
there is adequate ventilation. A spark in such