Download Print this page
Conair TravelSmart TSLT3C Instruction Manual
Conair TravelSmart TSLT3C Instruction Manual

Conair TravelSmart TSLT3C Instruction Manual

2 in one trimmer

Advertisement

Quick Links

Instruction Guide
2 in one trimmer
Model
TSLT3C
OPERATING
INSTRUCTIONS
BEFORE USE:
Prior to initial use, test trimmer on small area
of arm or leg. If any signs of allergic reaction or
sensitivity occur, discontinue use. Do not use
trimmer on ultra sensitive or irritated skin. Keep
out of reach of children.
TO OPERATE TRIMMER:
This trimmer comes with a two trimming blades.
The larger blade can be used to trim body
hair and eyebrows. The smaller is ideal one for
details.
It also comes with an attachment comb that
helps you achieve an even cut when you do
not want to completely remove the hair. The
attachment comb has two sides, the longer
tooth is good for body hair while the shorter is
good for eyebrow trimming. Align the indicator
with the L mark on the comb leaves hair longer
while align with S mark leaves hair shorter.
To use the attachment comb,
be sure the unit is in the "off "
position and slide it over the
trimming blades. Make sure that
the teeth of the comb are facing
in the same direction as the
trimming blade and that the top
of the comb is even with the top
of the trimmer.
(See Fig. 1)
If you want to completely remove hair, use the
trimmer without the attachment comb.
To operate the trimmer, slide the "on" switch
towards the trimming blades. When you are
finished trimming, slide the "on" switch away
from the blades.
To store the Trimmer, slide the
attachment comb to cover the
trimming blades. Be sure to align
triangle sign on the comb attachment
with indicator on the trimmer
housing.(see Fig. 2) Then, slide the
protective cap over the attachment
comb so that the triangle sign on
protective cap aligns with the triangle
sign on the handle tube (see Fig. 3)
Protecteur
1. Place the trimmer at a slight right angle to the
skin, and trim in the direction of hair growth.
2. Continue trimming in the direction of growth.
Be careful not to apply excess pressure to the
blade. This may damage the blade, and can
result in injury to the skin during trimming.
3. Pull the skin firmly with one hand during the
trimming process to ensure the closest possible
shave.
Short Tooth
REPLACING THE BATTERY:
L
S
L S
To replace battery, remove lower housing,
remove/replace battery and re-assemble to
cover housing. Dispose of battery properly
Long Tooth
after use. Do not incinerate.
Fig.1
1. Be sure appliance is off and remove the
protective cap. Hold the upper part of the
trimmer firmly and pull off battery cover.
(Handle tube).
S
L
ON
Fig.2
Manche
Fig.3
TRIMMING TIPS

Advertisement

loading

Summary of Contents for Conair TravelSmart TSLT3C

  • Page 1 (See Fig. 1) If you want to completely remove hair, use the Model trimmer without the attachment comb. TSLT3C To operate the trimmer, slide the “on” switch towards the trimming blades. When you are finished trimming, slide the “on” switch away from the blades.
  • Page 2: Care And Maintenance

    Protective Cap SWITCH Power Switch LIMITED TWO-YEAR WARRANTY Conair will repair or replace (at our option) your unit free of charge for 24 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the...