Cleveland IWC-PDW Specifications

™
Cleveland
OPTIONS & ACCESSORIES
IN-WALL CARRIER
FOR USE WITH WALL MOUNTED,
DIRECT STEAM, PRESSURE STEAMERS
Cleveland Standard Features
I Welded Steel Construction
I Furnished with 8 each 5/8"-11 NC studs for supporting
steamer Carrier Channels. Does not include necessary
Double Hex Nuts (16 each 5/8"-11 NC)
I Provided with eight, floor studs holes (11/16" Diameter)
to receive pre-set floor studs (5/8" diameter)
I To be imbedded in floor and wall and covered with
appropriate surfaces
I In-Wall Carrier is required for Wall-Mounted Units and
should be included in specification for Steamer
I Completed installation provides unobstructed floor area
for cleaning
Options & Accessories
Ë Mounting Studs, in lengths other than standard
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900 Web Site: www.ClevelandRange.com
Fax: 1-216-481-3782 Email: Steam@ClevelandRange.com
MODEL: IWC-PDW
Short Form Specifications
Shall be CLEVELAND, Model IWC-PDW, In-Wall Carrier, Steel, for installing
Cleveland Pressure Steamers. Includes (8) Supporting Studs 5/8" - 11 x
2 1 /2" long .
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
XIII
SECT. PAGE
0707
5