Casio Baby-G BG169-8V Operation Manual

MA0401-EB
About This Manual
General Guide
• Press C to change from mode to mode.
• Pressing L in any mode illuminates the display.
Timekeeping Mode
Press
Timekeeping Mode
• Press B to toggle the display between the day of the week and month, as shown
below.
City code
.
Day of week
• Press D to toggle between 12-hour and 24-hour formats.
• With 12-hour format, times between midnight and noon are indicated by A (am),
while times between noon and midnight are indicated by P (pm).
• The A and P indicators do not appear when you are using 24-hour format.
To set the time and date
1. While in the Timekeeping Mode, hold down A until the second's digits flash on the
display, which indicates the setting screen.
2. Press C to move the flashing in the sequence shown below.
Seconds
Day
3. While the seconds setting is selected (flashing), press D to reset it to 00. If you
press D while the seconds setting is in the range of 30 to 59, the seconds are
reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of
00 to 29, the minutes count is unchanged.
• While the DST ∗ setting is selected (DST on indicator is flashing), press D to
toggle it on (On) and off (OF).
• The DST on/off setting you make for the Timekeeping Mode does not affect the
World Time Mode.
• While the city codes setting is selected, use D to scroll through the available
codes until the one you want to use as your home time city is displayed.
• For full information on city codes, see the "City Code Table".
4. While any other setting is selected (flashing), press D to increase it. Holding down
D changes the setting at high speed.
5. Press A to exit the setting screen.
• The day of the week is automatically set in accordance with the date.
• The date can be set within the range of January 1, 2000 to December 31, 2039.
• The watch's built-in full automatic calendar automatically makes allowances for
different month lengths and leap years. Once you set the date, there should be no
reason to change it except after the replacement of the watch's battery.
∗ Daylight Saving Time (DST), which is also sometimes called "summer time"
advances the time for one hour, as is the custom in some areas during the summer.
Remember that not all countries or even local areas use Daylight Saving Time.
Backlight Precautions
The backlight uses an EL (electro-luminescent) panel that causes the entire display to
glow for easy reading in the dark.
In any mode, press L to illuminate the display for about three seconds.
• The electro-luminescent panel that provides illumination loses power after very long
use.
• The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
• The watch may emit an audible sound whenever the display is illuminated. This is
due to vibration of the EL panel used for illumination, and does not indicate
malfunction.
• The backlight automatically turns off whenever an alarm sounds.
• Frequent use of the backlight shortens the battery life.
Operation Guide 2516
• Button operations are indicated using the letters shown
in the illustration.
• Each section of this manual provides you with the
information you need to perform operations in each
mode.
World Time Mode Day Counter Mode
.
Minutes
Hour DST on indicator
Press .
Day
Month
DST City code Hour
Minutes
Month Year
• If you do not perform any operation for a few minutes while a setting screen (with
flashing digits) is on the display, the watch automatically exits the setting screen.
• If you do not perform any operation for a few minutes in the Day Counter Mode or
Telememo Mode, the watch automatically reverts to the normal timekeeping screen.
Telememo Mode
World Time Mode
City code
Hour : Minutes
Seconds
Day of week
The World Time Mode shows the current time in 40 cities (27 time zones) around the
world. The lower part of the display shows either the day of the week and day, or the
month and day. The format used is the one you select in the Timekeeping Mode
before entering the World Time Mode.
• For full information on city codes, see the "City Code Table".
• The time setting of the Timekeeping Mode and the World Time Mode are
synchronized, except for the Daylight Saving Time (summer time) setting. Whenever
you change the time setting for any city in the Timekeeping Mode, the settings of all
World Time cities are changed accordingly.
• The World Time Mode has its own Daylight Saving Time (summer time) setting.
To select a World Time City and view its time
In the World Time Mode, press D to scroll through city codes (time zones) to the east
or B to scroll to the west. Holding down B or D scrolls at high speed.
• You can set up an alarm in the Alarm Mode so it operates based on the current time
in a city you specify in the World Time Mode.
Daylight Saving Time (DST)
Daylight Saving Time automatically advances the time setting by one hour from
Standard Time. You cannot make individual Daylight Saving Time settings for each
city code (time zone). Turning on Daylight Saving Time affects all World Time time
zones. Remember that not all countries or even local areas use Daylight Saving Time.
To switch between Standard Time and Daylight Saving Time
In the World Time Mode, hold down A to toggle between Daylight Saving Time and
Standard Time.
DST OFF
Stopwatch Mode
Mode indicator
DST on indicator
Seconds
Day
[Month-day display]
Hold down .
Alarm Mode
Month
DST on indicator
DST ON
1