Canon PIXMA iP4300 Series Start Here

Start Here

Easy Setup Instructions
QT5-0427-V02
1
Prepare the Printer
a Place the printer on a flat and d Open the Top Cover. The Print Head
horizontal surface, and do not place Holder moves to the center.
any objects in front of the printer. Press
the Open Button to open the Paper
Output Tray, and extend the Paper
Output Tray Extension. Open the Paper
Support and extend the Paper Support
Extension.
Caution
Before turning on the printer, remove all of the
shipping tapes.
Open the Inner Cover. Write down the
e
serial number located inside the printer.
You will need this to register your
product.
Plug the power cord in the back of the
b
printer and connect the other end to the
wall outlet.
Press the POWER button to turn on the
c
printer.
2
Install the Print Head
a Remove the Print Head from its
package.
Top Cover
Caution
There may be some transparent or light blue ink
on the inside of the bag the print head comes in,
or the inside of the protective cap - this has no
effect on print quality. Be careful not to get ink on
yourself when handling these items.
Remove the orange protective cap from
b
the Print Head and discard it.
Protective Cap Print Head Nozzles
Inner Cover Serial Number Location
3
Install the Ink Tanks
Electrical Contacts
4
Connect the Printer and Load Paper
Cassette Loading
You can load paper in both the Auto Sheet
Feeder and Cassette.
Note
At purchase, the printer is set to feed from the
Auto Sheet Feeder.
Pull out the cassette from the
a
bottom of the printer.
Cassette
Remove the cover of the cassette.
b
For A5 or larger sized paper, pull
c
the tab towards you to unlock and
extend the cassette.
(nonstandard-size paper: 203 mm / 8 inches
or more in length)
(nonstandard-size paper: less than 203 mm /
8 inches in length)
Load the paper into the cassette
d
with the print side facing DOWN.
Note
Loading paper in the cassette provides
additional paper handling flexibility. For
additional information refer to the User's Guide.
Cover
Tab
A5 or larger
5" x 7" or smaller