Download Print this page
Canon i475D Series Setup Instructions
Canon i475D Series Setup Instructions

Canon i475D Series Setup Instructions

Desktop photo printer
Hide thumbs Also See for i475D Series:

Advertisement

Quick Links

1
Unpack the Printer
Carefully remove all items from the box.
1
i475D Series
Desktop Photo Printer
Paper Rest
FPO
Documentation
and Software Kit
i475D Series Print Head
Power Cord
Ink Tanks
BCI-24 Black
BCI-24 Color
2
Prepare the Printer
Remove all shipping tape from the front
1
and back of the printer.
Shipping
Tape
2
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Press the Power button. The printer will
3
initialize.
Power
Power
Button
Lamp
Open the output tray, then open the front
4
cover. The print head holder automatically
moves to the center.
Front Cover
Output Tray
Serial Number
5
Write down the serial number located to
the right of the print head holder. You
will need this later to register the product.

Start Here

Easy Setup Instructions
3
Install the Print Head
Remove the print head from its package.
1
Tear at notch to open
2
Remove the orange protective cap.
NOTE: Do not touch the electrical
contacts or the print head nozzles.
Electrical
Contacts
Print Head
Nozzles
3
Raise the gray lock lever on the printer.
4
Slide the print head into the holder until
it is securely seated.
Do not press it down.
5
Lower the lever until it clicks into place.
4
Install the Ink Tanks
Remove the black ink tank (BCI-24 Black)
1
from its package and pull off the orange
protective cap.
NOTE: Avoid ink at the bottom of the tank.
Protective Cap
2
Insert the black ink tank into the slot on
the right, then push in until the ink tank
clicks into place.
IMPORTANT: For correct printer
operation, make sure ink tanks
are secure in slots.
3
Repeat the procedure for the color ink
tank (BCI-24 Color), inserting it into the
remaining slot.
4
Close the front cover, attach the paper rest
and pull out the output tray.
Paper Rest
Output
Tray
NOTE: The printer will perform a print
head cleaning after the cover is closed.
i475D
Series
Desktop Photo Printer
5
Connect the Printer
and Load Paper
Turn the printer off.
1
IMPORTANT: Be sure printer is
off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
2
Connect one end of a USB cable to the
computer, the other to the printer.
USB Port
USB Cable
3
Pinch the paper guide and slide it to
the left. Load a sheet of blank paper
in the paper rest. Slide the guide
toward the left edge of the paper.
Paper
Guide
Continue with Step 6
on side two.

Advertisement

loading

Summary of Contents for Canon i475D Series

  • Page 1: Start Here

    Button Documentation and Software Kit Open the output tray, then open the front cover. The print head holder automatically moves to the center. i475D Series Print Head Power Cord Output Tray Ink Tanks BCI-24 Black BCI-24 Color Write down the serial number located to the right of the print head holder.
  • Page 2 Part no. QA7-2839-V02 ©2003 Canon U.S.A. Inc. Canon is a registered trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. P-i475D-ESI-0603-V02 Printed in Vietnam...

This manual is also suitable for:

475d - i color inkjet printer