Cateye RAPID X2 Manual

RAPID X2
TL-LD710-R / TL-LD710-F
Manual
Before using the light, please read this
manual and the included separate sheet
"LITHIUM-ION / LITHIUM-ION POLYMER
BATTERIES" thoroughly, and keep them
for future reference.
Design Pat. Pending
Copyright© 2014 CATEYE Co., Ltd.
2
TLLD710R/F-141201
Light unit
Rubber band Shade sticker
(Large/Small)
* Clear lens only
PRECAUTIONS ON USE
• Check periodically to ensure that the light
unit is attached securely.
Do not use a damaged rubber band.
• Stop your bicycle to operate the switch.
• Keep the light away from children.
• This unit is not totally waterproof. Please
wipe and dry it completely after using in
rain. Otherwise, it may cause failure.
• If the light unit or parts become dirty with
mud, etc., clean with a soft cloth which is
moistened with mild soap. Never apply
paint thinner, benzine or alcohol; damage
will result.
PRECAUTIONS ON CHARGING
• We recommend using 500+mA (USB2.0)
USB battery charger.
• Charging and lighting times are approxi-
mate values, and will vary by environmen-
tal and user conditions.
HOW TO REPLACE THE BATTERY
When the operating time decreases signifi-
cantly, the battery life is close to an end.
Please contact CatEye local distributor listed
on our website www.cateye.com or CatEye
for replacing battery.
PRECAUTIONS ON DISPOSAL
When disposing of the light unit, remove the
internal rechargeable battery and dispose of
it according to local regulations.
1
ENG
Always charge the product before use.
2
Attach securely in the mounting position.
(MICRO USB)
USB cable
(Front model)
OPTION :
3
3
Automatic battery-saving function :
When the remaining battery
power is low, the lighting
mode switch starts flashing
and the lighting mode
changes to flash. Charge the
light as soon as possible.
HOW TO CHARGE
1
2
USB cable
To PC or USB battery charger
HOW TO MOUNT
Rubber band
1
2
ø12 – 32 mm
Rubber band
2
1
Spacer X
HOW TO USE
Switch (Indicator)
Charging
Standard
charging time
2
or
1
Shade the light with the sticker if you are dazzled.
* Clear lens only (Front model)
4
Bracket
ON OFF
Press
and hold
Click
Lighting mode switch
Hi
1 h
Approx.
Vibration
8 h
Approx.
Pulse
16 h
Approx.
Charging is completed
2 h
Approx.
( USB 2.0 )
4
Clip
or
Low
5 h
Approx.
Flash
30 h
Approx.
Rapid
16 h
Approx.