Enlarging/Reducing Using Custom Copy Ratios
1
Press [Enlarge/Reduce] twice.
2
Use the numeric buttons to enter the copy ratio
Z O O M
5 0 - 2 0 0 %
-
You can enter the copy ratio from 50% to 200%, selectable in 1% increments.
Even after entering the copy ratio, you can use [ (-)] or [ (+)] to adjust the copy
ratio. To increase the copy ratio, press [ (+)]. To decrease the copy ratio, press
[ (-)].
NOTE
Enlarging or reducing using a custom copy ratio is not available with the 2 on 1 copy
function.
To return the copy ratio to 100%, press [Enlarge/Reduce] several times to display
<DIRECT 100%> ratio
You can also return the ratio to 100% using a preset copy ratio. (See "Enlarging/
Reducing Using Preset Copy Ratios," on p. 5-4.)
8 0 %
8 0 %
+
press [Set].
L T R
01
T E X T / P H O T O
Setting Enlarging/Reducing
press [Set].
5-5
5