Making Copies - Canon imageCLASS MF3110 Basic Manual

Making Copies

NOTE
When making copies on LTR-size paper after having continuously copied on paper
smaller than LTR-size paper, the copies may be dirty. To prevent copies from being dirty,
wait about 1 minute before making copies.
When making copies of a small size or heavy paper*, etc., the copy speed may be
slightly slower than usual.
* The paper type should be selected in the Menu. (See "Specifying the Paper Type," on p.
2-12.)
If you intend to make a copy and print with a thermal transfer printer using the same
sheet of paper, make the copy first. Failure to do so may make copies dirty or cause a
paper jam.
When copying onto transparencies, remove each transparency from the output tray as it
5
is output.
1
Place the document on the platen glass.
For details on how to place documents, see "Placing a Document on the Platen Glass,"
on p. 3-3.
2
Press [COPY].
3
Use the numeric keys to enter the number of copies.
You can set up to 99 copies.
4
Adjust any necessary settings for your document.
5-2 Making Copies
Specify the size and the type of the paper you load in the cassette or the
multi-purpose feeder. (See "Specifying the Paper Size and Type (Common for
Cassette and Multi-Purpose Feeder)," on p. 2-11.)
Press [Image Quality] to select the scanning resolution. (See "Adjusting the Image
Quality (Resolution)," on p. 5-6.)
Press [Exposure] to select the scanning exposure. (See "Adjusting the Exposure
(Density)," on p. 5-6.)
Press [Enlarge/Reduce] to select the copy ratio. (See "Setting Enlarging/Reducing,"
on p. 5-4.)