Canon Powershot SD980 IS Digital Elph User Manual page 155

Canon powershot sd980 is: user guide
Hide thumbs Also See for Powershot SD980 IS Digital Elph:
Table of Contents

Advertisement

Movies cannot be magnified (p. 112), edited (pp. 127 – 131), added to a print list
(p. 132), or registered to the start-up screen (p. 147).
Cannot select!
When choosing the selection range (pp. 121, 117, 123, 136), you tried to choose
a starting image that was after the last image or you tried to choose an ending
image that was before the starting image.
You tried to choose more than 501 images in the selection range (pp. 121, 117,
123).
Too many marks.
You chose more than 998 images in print settings. Choose less than 998
images (p. 134).
Cannot complete!
Print settings could not be saved correctly. Reduce the number of selected
images and try again (p. 134).
Naming error!
The file name could not be created because there is an image with the same
name as the folder that the camera is attempting to create, or the highest
possible file number has already been reached (p. 138). In the 3 menu, change
[File Numbering] to [Auto Reset] (p. 138) or format the memory card (pp. 22,
52).
Communication error
Images could not be transferred to the computer or printed due to the large
amount of images (approx. 1000) stored on the memory card. Use a
commercially available USB card reader to transfer the images. Insert the
memory card into the printer's card slot to print.
Lens error, restart camera
A lens error was detected. Press the power button to turn the camera off and
back on (p. 20). If this error message continues to appear, contact your Canon
Customer Support Help Desk as there may be a problem with the lens.
This error can occur if you hold the lens while it is in motion or when using it in a
location with excessive dust or sand in the air.
Exx (xx: number)
A camera error was detected. Press the power button to turn the camera off and
back on (p. 20).
If an error code appears directly after taking a picture, the shot may not have
been recorded. Check image in Playback mode.
If this error code reappears, note the number and contact your Canon Customer
Support Help Desk as there may be a problem with the camera.
Please tilt camera gently!
The image did not switch because you tilted the camera too strongly. Gently tilt
the camera (pp. 27, 28, 33, 111, 112).
List of Messages that Appear on the Screen
155

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents