Canon Digital IXUS 430 Quick Start Manual

CDI-E119-010 XXXXXXX
The following manuals are supplied with your
camera. Please refer to them as need be.
Contents
Reference Guides
of This Guide
Included accessories and
separately sold
equipment information.
System Map
1. Install the battery This Guide
pack and the CF
card.
Quick Start Guide
2. Shoot images
with the camera.
3. Play back the
Camera User Guide
images.
4. Erase any
unwanted
Direct Print
images.
User Guide
Learn the names
Supplied with a
of camera
printer
components.
5. Print the images.
Printer User Guide
6. Install the
software.
• Camera User
Connect the
Guide
camera to a
• Software
computer.
Starter Guide
• ZoomBrowser
7. Download the
EX Software
images to a
User Guide
computer.
• ImageBrowser
Software User
Guide
These PDF format
manuals are
available on the
What you can do
Canon website.
with the software
Please download
them from the
The various ways
following URL:
of using the
http://web.canon.jp/
software
Imaging/
information-e.html
Quick Reference ➜
Camera User Guide
Zoom
Wide Angle:
Zoom out from the subject.
Telephoto:
Zoom in on the subject.
* The zoom can be adjusted from 36 to 108 mm
(35 mm film equivalent)
Shooting Modes
: Auto
The camera automatically selects settings.
: Manual
Allows you to change various settings to record with the desired effects.
: Stitch Assist
Images shot in Stitch Assist mode can be merged together on a computer to
make a single panoramic image.
: Movie
For shooting movies.
Macro/Infinity Mode
Press the / button to display the or
in Display
Use this mode to shoot close-ups of flowers or small objects.
* Recordable Area at Minimum Shooting Range <Shooting Distance>
At wide angle end: approx. 58 x 43 mm (2.3 x 1.7 in.)
<From the front of lens: 5 cm (2.0 in.)>
At telephoto end: approx. 107 x 80 mm (4.2 x 3.1 in.)
<From the front of lens: 30 cm (1.0 ft.)>
in Display
Use this mode to shoot scenery or distant subjects.
This setting is not available in mode.
5

Printing with a Direct Print Compatible Printer

A.
Connect the camera to the printer and turn on the
printer's power.
Set the camera to playback mode and turn
the power on.
Camera Interface Cable
© 2004 CANON INC.
1

Preparing the Camera

➜
A.
Charge the battery pack.
Place the battery pack in the battery charger and plug the
charger into a power outlet. The charge indicator lights red
while charging and changes to green when the battery pack
is charged.
Charging the battery pack takes approximately 100 minutes.
Charge Indicator
• Battery charger model names and types vary by region.
B.
Install the battery pack.
Slide the battery cover open. Press the battery lock while
inserting the battery pack all the way in, aligning the arrows
on the camera and battery pack. Slide the battery cover
closed.
Battery Lock
C.
Install the CF card.
Slide the lock and open the CF card slot cover. Insert the CF
card with its label facing upward until the CF card eject
button fully extends.
Close the CF card slot cover.
Lock
CF Card Eject Button
Changing the Displayed Information
on the LCD monitor.
Press the
Shooting Mode:
LCD Monitor - On
(No Information)
LCD Monitor - On
(Information View)
LCD Monitor - Off
➜
B.
, or appears* in the upper left corner of the
camera's LCD monitor, indicating that the printer is
ready to print.
* The displayed icon may vary depending on the printer model.
Printers
2
Shooting
A.
Slide the mode switch to
Shooting mode dial to
B.
Press the ON/OFF button to turn the camera on.
The power lamp will light.
PRINTED IN JAPAN
C.
Set the date and time (first time the camera is
powered on).
Camera User Guide
Use the
set, and the
Check that the date and time shown are correct,
then press the
D.
Aim the camera at the subject and adjust the zoom to achieve the desired composition (see
"Zoom" in the "Quick Reference" section).
E.
Focus and shoot.
Press the shutter button halfway to focus.
• The camera focuses and two beeps sound.
3
Playback
A.
Slide the mode switch to
4

Erasing an Image

A.
Use the buttons to select the
image you wish to erase (
press the button (
button to switch the displayed information as follows.
Playback Mode:
Standard Information View
Detailed Information View
No Information
Direct Print User Guide
C.
➜
Camera User Guide
(Rec.) ( )and turn the
(Auto) ( ).
Power Lamp
buttons to select the items you wish to
buttons to change the value.
button.
➜
Camera User Guide
B.
(Playback). Play back the images.
Use the
➜
Camera User Guide
B.
When the confirmation screen appears, check
) and that [Erase] is selected and press the
).
Select [Cancel] using the
erasing.
Switching between Shooting/Playback
Shooting:
Slide the mode switch to .
Flash
Press the button to switch between flash modes.
(Some settings are not available with certain shooting modes.)
Auto
Auto with red-eye reduction
Flash on
Flash off
Slow-synchro
Recordable area: 46 cm - 2.0 m (1.5 - 6.6 ft.) (telephoto) / 46 cm - 3.5 m (1.5 - 11 ft.)
(wide-angle)
* Red-eye reduction: This feature reduces the effect of light reflecting back from
the eyes and making them appear red.
* Slow Synchro: The flash timing is adjusted to a slow shutter speed, allowing you
to shoot night sceneries.
In addition, there are functions that can be set in each shooting mode.
For details, see "Functions Available in Each Shooting Mode" at the end of
the Camera User Guide.
D.
Choose the image you wish to
print and press the button.
Select print settings as required.
Print Setting Screen
The screen may vary depending on the
printer model.
Press the shutter button
all the way to shoot.
buttons to display the image you wish to see.
button.
buttons to cancel without
Playback:
Slide the mode switch to .
Use the , , or button to
select [Print] and press the
button.
The printing of the image will start.
Please turn over