azur 740C Upsampling compact disc player User’s manual...
This guide is designed to make installing and using this product as easy as possible. Information in this document has been carefully checked for accuracy at the time of printing; however, Cambridge Audio's policy is one of continuous improvement, therefore design and specifications are subject to change without prior notice.
To obtain warranty service, please contact the Cambridge Audio authorised dealer from which you purchased this product. If your dealer is not equipped to perform the repair of your Cambridge Audio product, it can be returned by your dealer to Cambridge Audio or an authorised Cambridge Audio service agent.
Important safety instructions Please take a moment to read these notes before installing your 740C, as they will enable you to get the best performance and prolong the life of the unit. We advise you follow all instructions, heed all warnings and keep the instructions for future reference.
The sophisticated DSP software in the 740C even allows these outputs to be set to output raw (pass through) or upsampled data independently from the main audio outputs. Refer to the ‘CD player setup’ section for more information. S/P DIF CO-axial Digital - To obtain best results, use a high quality 75 ohm digital RCA interconnect cable (not one designed for normal audio use).
Press to select between CD Playback or Digital Inputs 1 and 2. Also used to toggle through the options on selected menu screens. Please refer to the ‘CD player setup’ section of this manual for more information. Infrared sensor Receives IR commands from the supplied Azur remote control. A clear unobstructed line of sight between the remote control and the sensor is required.
Remote control The 740C is supplied with an Azur Navigator remote control that operates both this CD player and other Cambridge Audio Azur amplifiers. Insert the supplied AAA batteries to use. Note: The remote may be in Amp mode when first activated. Please refer to the Amp Control section for more information.
2. Press the Random button on the remote control. ‘Random’ will appear on the display. 3. Press Play. The CD Player will now play the entire disc in a random order. 4. Press Random to exit Random function. The disc will continue playing to the end in the correct order.
Manufactured in an Power ISO9002 approved facility This device complies with Designed in London, England part 15 of FCC rules azur 740C Upsampling Compact Disc Player Caution Risk of electric shock. Power Rating: 230V AC ~ 50Hz Do not open.
CD player setup The 740C has a custom-made display on the front of the unit showing the current status and allowing access to the 740C System Configuration menus. The 740C features some advanced settings that allow its use to be customised to user preference.
CD player “On” command will be generated. If the button is kept held down for a further 12 seconds, a CD player “Off” command is generated. A full code table for this product is available on the Cambridge Audio website at www.cambridge-audio.com. Troubleshooting There is no power Ensure the AC power cord is connected securely.
Cambridge Audio Gallery Court Hankey Place London SE1 4BB England www.cambridge-audio.com © 2007 Cambridge Audio Ltd...