INTRODUCTION Thank you for purchasing this Cambridge Audio azur series phono pre- amplifier. It is the result of our ongoing research and development program for over three decades of producing high quality audio products. We hope that you will appreciate the results and enjoy many years of listening pleasure.
CONTENTS Introduction ...2 Important safety Information...3 Rear panel connections...4 Troubleshooting... 6 Specifications ...6 Limited warranty... 7 540P/640P Phono pre-amplifer IMPORTANT SAFETY INSTRUCTIONS Please take a moment to read these notes before installing your Azur phono pre-amplifier, they will enable you to get the best performance and prolong the life of the product.
REAR PANEL CONNECTIONS azur 540P www.cambridge-audio.co.uk MM Phono Pre-Amplifier Designed in London, England 0.5 A Output Use supplied PSU only! This device complies with part 15 of FCC rules 540P MC input sockets (640P only) If your turntable uses a moving coil cartridge, connect outputs here (0.5-1mV, with 100 ohm 220pF loading).
Page 5
(2RCA-2RCA) Must not be connected to a phono level input azur 540P www.cambridge-audio.co.uk MM Phono Pre-Amplifier Designed in London, England 0.5 A Output Use supplied PSU only! This device complies with part 15 of FCC rules...
TROUBLESHOOTING There is no power Ensure the AC power cord is connected securely. Ensure the plug is fully inserted and is switched on. There is no sound Make sure the unit is plugged in. Check that your turntable is properly connected. Check that your speakers are properly connected.
If your dealer is not equipped to perform the repair of your Cambridge Audio product, it can be returned by your dealer to Cambridge Audio or an authorised Cambridge Audio service agent. You will need to ship this product in either its original packaging or packaging affording an equal degree of protection.
Page 8
540P/640P www.cambridge-audio.co.uk Part No. AP14509/2...