Bushnell 20-4124 User Manual page 5

gETTINg STARTED
INSERTINg ThE BATTERY
Remove the battery compartment cover (Figure .) by loosening the battery compartment locking
screw with a coin. Insert one CR- 3-volt lithium battery with polarity (+ and -) as indicated inside
the compartment. Replace the battery compartment cover and secure by tightening the battery
compartment locking screw.
Note: The battery will provide approximately 5,000 ranges. Remove the battery from the riflescope if
it is not going to be used for longer than one month.
(Figure 2) Infrared Remote Trigger Pad
7
BATTERY LIFE INDICATOR
Power on Screen
Battery: Full
OPERATIONAL SUMMARY
WARNING: This laser rangefinder riflescope should never be used as a substitute for a binocular,
spotting scope, or measuring device only, as it may result in your inadvertently pointing the gun
at another person. Before using this device, always remember it is mounted on a firearm and all
firearm safety precautions apply. When handling firearms, always keep the muzzle pointed in a safe
direction.
While looking through the riflescope, always depress the main power button (Figure .) once to turn
the unit on. You can now use the infrared remote trigger pad (Figure ) to activate the laser and
Half Battery: It is recommended
that the battery be replaced.
8