Elastic Stitching; Puntada Elástica - Brother XL-3010 Operation Manual

Brother xl-3010 sewing machines: users manual
Hide thumbs Also See for XL-3010:
Table of Contents

Advertisement

Elastic Stitching

Pattern
10 (Elastic Stitch)
The Elastic Stitch can be used for 3 functions:
mending, sewing elastic or joining fabric. Each is
explained below.
Set the Pattern Selection Dial to 10.
MENDING
1. Set the Stitch Length Dial between F and 2.5.
2. Place the reinforcement fabric under the tear to
be mended.
3. Following the line of the tear, sew using the
Elastic Stitch as illustrated in fig. A.
SEWING ELASTIC
1. Place the elastic on the fabric.
2. As you sew, stretch the elastic both in the front
and behind the presser foot as shown in fig. B.
JOINING FABRIC
The Elastic Stitch can be used to join two pieces of
fabric together and is very effective when sewing
knitted fabrics. When nylon thread is used, the stitch
will not be visible.
1. Place the edge of the two pieces of fabric together
and center them under the presser foot.
2. Sew them together using the Elastic Stitch taking
care to keep the two fabric edges close together
as shown in fig. C.
A
30
29
Stitch Length
F-2.5
Se puede usar la puntada elástica para tres
operaciones: los remiendos, la inserción de gomas
elásticas y como puntada de unión para juntar dos
tejidos.
Cada una de estas operaciones se detalla a
continuación.
REMIENDOS
1. Ponga el selector de largo de puntada entre F y
2,5.
2. Coloque una tela de refuerzo debajo de la parte
a remendar.
3. Siguiendo la línea de la rasgadura, cosa con la
puntada elástica tal como ilustrado en la fig. A.
INSERCION DE GOMAS ELASTICAS
1. Ponga la goma sobre el tejido.
2. A medida que esté cosiendo, estire el elástico
tanto delante como detrás del prensatelas tal
como se muestra en la fig. B.
PUNTADA DE UNION
La puntada elástica puede servir para unir dos
trozos de tejido y resulta muy eficiente para la
costura de prendas de punto. Si se usa un hilo de
nilón, la puntada resultará invisible.
1. Junte las orillas de ambos trozos de tejido y
céntrelas debajo del prensatelas.
2. Cosalas juntas con la puntada elástica, teniendo
sumo cuidado en mantener las dos orillas de los
tejidos muy juntas, tal como se aprecia en la fig.
C.
B
Puntada elástica
Número de puntada
10 (Puntada Elástica)
C
Largo de puntada
F-2,5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl3022

Table of Contents