Re-Packing The Printer - Brother HL-1040 User Manual

RE-PACKING THE PRINTER

!
Caution
Whenever you transport the printer, use the packing materials which are
provided with your printer. Also, follow the steps below to re-pack the
printer, or the printer may be damaged which will void the printer's
warranty.
1. Turn off the power switch and unplug the printer from the AC outlet.
Remove the AC cord and the extention wire of the paper tray from the
printer.
2. Open the top cover.
3. Remove the drum unit assembly, referring to the previous section.
Note
Remove the drum unit assembly with the toner cartridge included.
Fig. 5-24 Removing the Drum Unit Assembly
CHAPTER 5 MAINTENANCE
5-15