Output Tray And Paper Support Wire - Brother HL-1040 User Manual

OUTPUT TRAY AND PAPER SUPPORT WIRE

The printer ejects paper with printed surfaces face down into the output
tray at the front of the printer.
When the output tray is closed, the ejected paper comes out sheet by sheet
through the slit at the front. When you open the tray, sheets can be
stacked on the tray.
Follow these steps to open the output tray:
1. Pull the top of the tray down ( ).
2. Extend the extension support wire ( ).
You can stack up to 100 sheets in the output tray.
!
Caution

When you use transparencies, remove each sheet immediately after
printing. Stacking sheets may cause paper curled or paper jam.

Continuous printing with the output tray closed may cause
condensation inside the output tray.
Fig. 2-8 Opening the Output Tray and
Extending the Extension Support Wire
CHAPTER 2 PAPER HANDLING
2-11