Recording Outgoing Message (Ogm) On An External Tad - Brother MFC-3220C User Manual

Brother mfc-3220c: users guide
Hide thumbs Also See for MFC-3220C:
Table of Contents

Advertisement

Recording outgoing message (OGM) on an external TAD

Timing is important in recording this message. The message sets up
the ways to handle both manual and automatic fax reception.
1
Record 5 seconds of silence at the beginning of your message.
(This allows your machine time to listen for the fax CNG tones
of automatic transmissions before they stop.)
2
Limit your speaking to 20 seconds.
3
End your 20-second message by giving your Fax Receive Code
for people sending manual faxes. For example:
"After the beep, leave a message or send a fax by pressing
51 and Start."
We recommend beginning your OGM with an initial 5-second
silence because the machine cannot hear fax tones over a
resonant or loud voice. You may try omitting this pause, but if your
machine has trouble receiving, then you must re-record the OGM
to include it.
1 - 12 INTRODUCTION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax-1820c

Table of Contents