Understanding The Error Messages - Brother MFC-295CN User Manual

Brother mfc-295cn: user guide
Hide thumbs Also See for MFC-295CN:
Table of Contents

Advertisement

Chapter 11
Understanding the
Error Messages
Once you are familiar with the types of errors
that can occur while you are using
®
PhotoCapture Center
identify and troubleshoot any problems.
Hub is Unusable.
This message will appear if a Hub or USB
Flash memory drive with a Hub has been
put into the USB direct interface.
Media Error
This message will appear if you put in a
memory card that is either bad or not
formatted, or when there is a problem with
the media drive. To clear this error, take
out the memory card.
No File
This message will appear if you try to
access a memory card or USB Flash
memory drive in the drive (slot) that does
not contain a .JPG file.
Out of Memory
This message will appear if you are
working with images that are too large for
the machine's memory.
This message will also appear when a
memory card or USB Flash memory drive
you are using does not have enough
space available for the scanned
document.
Media is Full.
This message will appear if you are trying
to save more than 999 files in a memory
card or USB Flash memory drive.
76
11
, you can easily
Unusable Device
This message will appear if a USB device
or USB Flash memory drive that is not
supported has been connected to the USB
direct interface. (For more information,
visit us at http://solutions.brother.com.)
This message will also appear if you
connect a broken device to the USB direct
interface.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-255cw

Table of Contents