Bosch Axxis WFL2090UC Operating And Installation Instructions page 32

Front-loading washing machine
Table of Contents

Advertisement

Connection options
A Cold water connection and
B Hot water connection (max. 140 °F /60 °C)
or Cold water connection only with Y piece
q After the connection:
Turn on the water completely, and check
whether connection points are watertight.
CAUTION
The connection points are under full water
pressure. Check seal with tap fully open.
32
Water drainage
Do not bend or pull the water drainage hose.
Height difference between the placement area
of washer and the drainage point:
min. 10 mm
Maximum 110 cm / 43 inches.
Standpipe or In Wall Installation
q Use the U bracket. Attach the U bracket to the
end of the hose and insert end of hose into
standpipe or wall drain.
min.
10 mm
q Use a strap or cable tie connected to U bracket
to hold hose in place.
Drainage into a siphon
q Secure the connection point with a hose
clamp.
CAUTION

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Axxis wfl2090

Table of Contents