Blomberg DWT14210 Installation Manual page 22

5. Attach the two mounting brackets to the wooden
1 / 8 5 / 8
door with 4 screws (Ø " x " (Ø 3.5mm x 14mm)
(Figure C).
6. Cut the small tabs on the mounting brackets
off (Figure A).
7. Cut the side tabs on the plastic mounting
brackets off.
8. Mount the wooden door onto the dishwasher
with the plastic mounting brackets which you have
attached (Figure B).
9. Open the door and remove the two caps and
two screws inside the door at position 1 and 4
(Figure C).
19
USA