EasyPro BFL9 Instructions For Operation, Safety, Warranty

Submersible, Warm White, Low Voltage • BFL9, BFL12, BFL18
Underwater LED Light
Instructions for Operation • Safety • Warranty
Thank you for purchasing an EasyPro submersible LED pond and fountain light. With this
warm white LED light you can make your fountain glow, illuminate your pond from within,
highlight your waterfall and extend the enjoyment of your water feature in the evening
hours. The BFL lights can be used in the landscape out of the water or as a submersible
underwater light. Five year limited warranty.
BFL Light Specs:
1. Stainless Steel top plate with epoxy coated zinc/aluminum alloy housing
2. IP68 rated
3. Beam angle: 30 degrees
4. 12 Volt AC; with integrated driver
5. Non-dimmable
6. 2800-3000K color temperature
7. 115 lumens per watt
8. 15' power cord with bare leads
Safety and Electrical Connections:
1. Always disconnect the electrical supply before handling, maintaining, repairing
or installing any pond equipment.
2. Light(s) must be attached to a 12 volt AC transformer.
3. Never hook the lights directly to a 120 volt or higher outlet.
4. Connect the transformer only to a 120 volt receptacle that is protected by a Ground
Fault Circuit Interrupter (GFCI).
5. Do not use this product in bathrooms or swimming pools.
Light Watts
BFL9
9 watt
BFL12 12 watt
BFL18 18 watt
Fits Pipe Size
(Sch 40 PVC)
1"
1 / "
1
2
2"