Related Manuals for King Canada KRS-102
Summary of Contents for King Canada KRS-102
- Page 1 FOLDING STANDS FOLDING ROLLER STAND (MODEL KRS-102) 3-IN-1 FOLDING ROLLER STAND (MODEL KRS-108) INSTRUCTION MANUAL COPYRIGHT © 2021 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
-
Page 2: Proof Of Purchase
Contact your retailer or visit our web site at www.kingcanada.com for an updated listing of our authorized service centers. In cooperation with our authorized service center, King Canada will either repair or replace the product if any part or parts covered under this warranty which examination proves to be defective in workmanship or material during the warranty period. -
Page 3: Safety Warnings And Precautions
SAFETY WARNINGS AND PRECAUTIONS WARNING! When assembling and using stand, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before setup and use! SAFETY WARNINGS AND PRECAUTIONS 1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. 2. -
Page 4: Assembly And Adjustments
4) Repeat steps 1-3 for the second cross brace and leg. ATTACHING THE ROLLER HEAD The KRS-102 Roller Stand comes with one roller, as shown in (A) Fig. 2. KRS-108 comes with a 3-in-1 roller, as shown in (B) Fig.2. The roller head assemblies need to be assembled to the extension arm. -
Page 5: Operation And Maintenance
Your Folding Roller Stand requires very little care and maintenance. Simply clean with a non-abrasive cleaner. When servicing, use only identical parts. Use of any other parts may create a hazard or cause product damage. Contact a King Canada service centre for identical replacement parts.