Memory Modules Installation - Biostar K8VGA-M User Manual

2.3 M M
EMORY ODULES
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
Note:
To assure the system safety, if you need to change DDR modules,
firstly, please unplug the 20-pin power cable with the power
connector, and then you can change the modules. Afterwards, plug
in the cable the power connector again, and finally you can boot up
the system.
K8VGA-M
I
NSTALLATION
9