Belkin F8GBPS003 Installation Instructions

IMPORTANT • Innovative 8-way directional
First, please make sure your pad.
PlayStation is turned off before
NOTES
plugging in or unplugging your
• The controller can be used with
controller.
any software which displays
the "Analog Controller
FEATURES
Compatible", "Dual Shock 2
• Built-in force feedback (Dual
Compatible" or " NeGcon
™ ™
Shock and Dual Shock 2
Compatible" icons.
compatible)
• The built-in force feedback can
• Full analog, digital, or steering
be used with any software
wheel simulation mode selector
which displays the "Vibration
with LED indicator
Function Compatible" icon.
(The vibration function can be
• Dual analog joysticks with
turned on or off using your
push-down buttons (L3, R3)
game's "Option" controls.)
• 12 analog action buttons in full
analog support
PLAY MODE SELECTION
The controller features three
• Macro button for programming
modes of function: Digital, Full
functions to button
Analog, and Steering Wheel
combinations
Simulation.
The mode LED light on your • The pressure force for the
controller will indicate the mode analog action buttons can be
of use in the following manner: adjusted in certain games by
using "Option" controls.
• Digital Mode
(Mode LED is OFF)
• In "Analog Controller
Compatible" PlayStation
• Full Analog Mode
games, the controller will act
(Mode LED is ON)
only as a "Dual Shock
controller". Therefore, there is
• Steering Wheel Mode
no analog function for the
(Mode LED is BLINKING)
action buttons.
FULL ANALOG MODE
DIGITAL MODE
Full Analog Mode is available
Note: Digital Mode is only
with games displaying "Analog
available with certain games.
Controller Compatible" and "Dual
Refer to your game manual.
Shock 2 Compatible" icons.
• To use the Digital Mode, press
• To use the Full Analog Mode,
the MODE button until the
press the MODE button until
Mode LED light is turned off.
the mode LED is turned on.
You are now in Digital Mode.
You are now in Full Analog
Mode.
STEERING SIMULATION MODE MACRO FUNCTION
Press MODE button until the The Nostromo p45 has a Macro
Mode LED light begins to blink. Button. This button is for use in
You are now in Steering Wheel certain games, mainly fighting
Simulation Mode. games, where you can combine
button presses on the directional
Notes:
pad and/or the action buttons to
• While in this mode, this
execute special moves. Macro
controller will emulate an
functionality allows you to use
Analog Steering Wheel. All
additional functions with a single
movements to the Left Analog
button press, giving you the
Stick will emulate steering,
advantage you need to win.
while the Right Analog Stick
will serve as both gas and
RECORDING MACROS:
brake pedals.
Macros can be set to the T4, L3,
T2, and R3 buttons. Up to 15
• Refer to your game manual for
button presses can be
additional information regarding
programmed into one macro.
the location and setting of
When programming macros,
button functions required for
keep in mind that pressing
game play.
multiple buttons simultaneously
counts as one single command
(pressing directional left, circle,
and square at the same time will
count as one command, not
three). Button presses must be
executed within 1.5 seconds of
each other to be stored in the
macro.
DELAY:
Some combos require a delay
between commands. Pressing
SELECT will record a delay. A
delay does not count as one of
the fifteen programmable button
presses.
HOLD:
In some combos, you need to
hold the button (or direction)
down for a period of time. To do
this, hit the button twice, or as
many times as necessary.