Belkin F5U208 Installation Manual

F5U208 Windows XP Installation
1. After unzipping the files onto your hard drive, the path you will have to specify during installation will
be C:\F5U208. If you chose to unzip the files onto a 3 ½ floppy disk, the installation path would be
A:\
2. When you plug in the adapter, Windows will find a new device, (if Windows does not find a new
device, follow the uninstall instructions first).
3. Windows will ask, What do you want the wizard to do? Choose, Install from a list or specific
location (advanced). Click next.
4. Choose the option, Include this location in the search: and type the path c:\F5U208 (or you can
browse to the C:\ and locate the folder that you unzipped the files to) and then click Next.
5. You will see a warning stating that the Belkin USB VideoBus II, Video has not passed Windows
Logo testing, Continue Anyway. And click on Finish.
6. Windows will then find the Belkin USB VideoBus II, Audio. Windows will ask, What do you want
the wizard to do? Choose, Install from a list or specific location (advanced). Click next.
7. Choose the option, Include this location in the search: and type the path c:\F5U208 (or you can
browse to the C:\ and locate the folder that you unzipped the files to) and then click Next.
8. You will see a warning stating that the Belkin USB VideoBus II, Audio has not passed Windows
Logo testing, Continue Anyway. And click on Finish.
9. In order to check the installation, go to Start, and right click on My Computer and left click on
properties. Click on the Hardware tab and then click on the Device Manager button. Click on the
plus sign next to Imaging Devices. Under this heading you should see a Belkin USB VideoBus II,
Video. This would be the video capture option that you would choose in your application. Click on
the plus sign next to Sound, video and game controllers. Under this heading you should see a Belkin
USB VideoBus II, Audio. This would be the sound capture option that you would choose in your
application. If you do not see either of these or if there is an unknown or USB device with a question
or exclamation mark, proceed to the un-installation instructions.
Uninstall Instructions
(The adapter must be plugged in.) Look for any Question or Exclamation marks in front of any of
the selections, if you see one in front of Belkin or unknown USB devices, remove these selections
by right clicking on them and choose Uninstall, otherwise continue to next step.
1. Leave the adapter plugged into the computer and go to Start, and right click on My Computer and left
click on Properties.
2. Click on the Hardware Tab and then click on the Device Manager button.
3. Click on the plus sign next to Imaging Devices. Under this heading you should see a Belkin USB
F5U208 Windows XP Installation
10/24/2001
Page 1 of 2