General Settings - Sony XNV-770BT Operating Instructions Manual

General settings

c "General" c the desired item c the desired option. For details on this procedure, see
Touch
"Basic setting operation" on page 52.
For details, see the pages listed below. "z" indicates the default setting.
Item
Security Control (page 60)
Clock Adjust (page 60)
Auto OFF
Shuts off automatically after a
desired time when no source is
selected.
CT (Clock Time) (page 20, 21)
Output Color System
Changes the color system
according to the connected
monitor.
(SECAM is not supported.)
Dimmer
Changes the display
brightness.
Dimmer Level
Sets the brightness level when
the dimmer is activated.
Touch Panel Adjust
(page 50)
Beep
Language
Key Illumination
Option Purpose
– –
– –
No (z)
To deactivate the Auto Off
function.
30sec, 30min,
To select the desired time.
60min
ON
To activate the CT function.
OFF (z) To deactivate the CT
function.
PAL
To set to PAL.
NTSC (z) To set to NTSC.
Auto (z)
To dim the display
automatically when you
turn lights on. (Available
only when the illumination
control lead is connected.)
ON To dim the display.
(–5 ~ +5)
To select the level.
z: 0
– –
ON (z) To activate the operation
sound.
OFF To deactivate the operation
sound.
English (z),
To select the display
Español,
language.
Русский
ON (z) To turn on the button
illumination.
OFF To turn off the button
illumination.
Unit status
Any status
Any status
Any status
Any status
No source
selected
Any status
Any status
Any status
Any status
No source
selected
Any status
continue to next page t
53