Changing the audio channel
MPEG-4
When playing a VCD/CD/MP3/WMA/AAC/
Xvid/MPEG-4, you can listen to both the right
and left channel, only the right channel, or only
the left channel via both the right and left
speakers.
The options are indicated below.
“2-Ch”: Standard stereo sound (default)
“L-Ch”: Left channel sound (monaural)
“R-Ch”: Right channel sound (monaural)
For VCD/CD/MP3/WMA/AAC
1
During playback, touch “Play Menu,”
then “Stereo” repeatedly until the
desired audio channel appears.
For Xvid/MPEG-4
1
During playback, touch “Play Menu,”
then “Audio” repeatedly until the
desired audio channel appears.
To close the play menu, touch “Play Menu.”
Note
You may not be able to change the audio setting
depending on the disc.
Tip
Operation via the remote commander by pressing
(AUDIO) repeatedly is also available.
Adjusting the audio output level
— Dolby D level
You can adjust the audio output level for a DVD
recorded in Dolby Digital format, to reduce the
volume level differences between discs.
1
During playback, touch “Play Menu.”
2
Touch the “Adjust” box to set to “ON.”
3
Touch –/+ repeatedly to adjust the
output level.
The output level is adjustable in single steps,
between –10 and +10.
To close the play menu, touch “Play Menu.”