Radio; Listening To The Radio; Reception Controls - Sony XNV-770BT Operating Instructions Manual

Radio

Listening to the radio

1
Touch "Source List," then "Tuner."
From the top menu, touch "AV Source," then
"Tuner."
The radio reception display appears, and the
preset list is displayed automatically.
Source List ATT
P1 P2
P4 P5
Band
2
Touch "Band."
The band list appears.
Source List ATT
FM1 FM2 FM3
Band
3
Touch the desired band ("FM1," "FM2,"
"FM3," "AM1," or "AM2").
Touch "Band" again to close the band list.
4
Perform tuning.
To tune automatically
Touch .
./>
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
To tune manually
Touch repeatedly until the desired
m/M
frequency is received.
To skip frequencies continuously, touch and
hold .
m/M
Navi Top
P3
BTM
P6
Memory
Receive Preset PTY
Menu List List
Navi Top
AM1 AM2
Receive Preset PTY
Menu List List

Reception controls

Touch the display if the reception controls are not
displayed.
1 2
Source List ATT
Band
5 6 7
"Source List"
1
Touch to open the source list. (page 14)
"ATT"
2
Touch to attenuate the sound. To cancel,
touch again.
3 "Navi"
Touch to enter the navigation mode.
(page 18)
4 "Top"
Touch to open the top menu. (page 14)
m/M
5
Touch to tune manually.
Touch and hold to continuously skip
frequencies.
./>
6
Touch to tune automatically.
"Band"
7
Touch to open the band list and change
the band.
"Receive Menu"
8
Touch to open the receive menu, which
contains the following items.
• "Mono": Touch to activate monaural
mode if FM reception is poor. To restore
stereo reception, select "OFF."
• "Local": Touch to tune only to stations
with strong signals. To tune normally,
select "OFF."
9 "Preset List"
Touch to list up stored stations, or store
stations. (page 20)
0 "PTY List"
Touch to open the PTY list. (page 21)
3 4
Navi Top
Receive Preset PTY
Menu List List
8 9 0
19