Behringer Eurorack UB1002 User Manual

Behringer Eurorack UB1002 User Manual

10/12/6-input, 2-bus mic/line mixer
Hide thumbs Also See for Eurorack UB1002:

Advertisement

User Manual
A50-18013-00005

Advertisement

Table of Contents
loading

Summary of Contents for Behringer Eurorack UB1002

  • Page 1 User Manual A50-18013-00005...
  • Page 2: Important Safety Instructions

    EURORACK UB502/UB802/UB1002/UB1202 Important Safety Instructions This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accom- panying literature.
  • Page 3: Table Of Contents

    EURORACK UB502/UB802/UB1002/UB1202 Forword Dear Customer, I’m sure you’re one of those people who have devoted themselves body and soul to your chosen area and no doubt this has transformed you into an expert in your field! Well, for over 30 years, my passion has been music and electronics.
  • Page 4: Introduction

    EURORACK UB502/UB802/UB1002/UB1202 Introduction Congratulations! In purchasing our EURORACK UB502/UB802/ UB1002/UB1202 you have acquired a mixing console whose small size belies its incredible versatility and audio performance. The range of inputs and outputs comprises microphone inputs (with +48 V phantom power supply), line inputs, possibilities for con- necting effects devices, connectors for a 2-track master machine (e.g.
  • Page 5: Mono Channels

    The cut-off frequencies of the upper and lower band are 12 kHz and 80 Hz respectively. The mid band (UB802/UB1002/ UB1202) is configured as a peak filter with a center frequency of 2.5 kHz.
  • Page 6: Fx Sends, Balance And Level Adjustment

    FX controls is sent to the effects unit via the FX SEND ouput. Use the FX SEND control of the main section to adjust the overall send level (UB1002 and UB1202 only). 2.3.2 Monitor and main mix Fig.
  • Page 7: Tape Connectors

    The TAPE INPUTs are used to bring an external signal source (e.g. CD player, tape deck, etc.) into the console. They can also be used as a standard stereo line input, so the output of a second EURORACK or BEHRINGER ULTRALINK PRO MX882 can be connected. Fig. 2.11:...
  • Page 8: Audio Connections

    EURORACK UB502/UB802/UB1002/UB1202 Audio connections You will need a large number of cables for different applications. The illustrations below show how the connectors should be wired. Be sure to use only high-grade cables. Please use commercial RCA cables to connect the 2-track inputs and outputs.
  • Page 9: Specifications

    1/3 as far left as possible; channels 2/4 as far right as possible; reference = +6 dBu. BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice.
  • Page 10: Warranty

    BEHRINGER logo, JUST LISTEN and EURORACK) mentioned belong to their respective owners, and such use neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the trademark owners with BEHRINGER. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein.
  • Page 11 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Important information: Changes or modifications to the equipment not expressly approved by BEHRINGER USA can void the user’s authority to use the equipment. EURORACK UB502/UB802/UB1002/UB1202...

This manual is also suitable for:

Eurorack ub1202Eurorack ub502Eurorack ub802

Table of Contents