EUROPOWER PMH2000 IMPORTANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture.
Because we know that your success is our success, too! I would like to thank all people whose help on “Project PMH2000” has made it all possible. Everybody has made very personal contributions, starting from the designers of the unit to the many staff members in our company and finally to you, the user of BEHRINGER products.
CD player or tape deck, for example. The TAPE/LINE OUT RCA output provides the stereo main mix signal of your PMH2000 and can be routed to, say, a recording machine. When the TAPE OUT signal is connected to a tape...
The MAIN LEVEL control governs the overall volume of the PMH2000. The MAIN LEVEL display reads the output level of the PMH2000. The upper LED (LIM) lights up when the built-in limiter is activated, thus protecting against signal peaks. Use the FX FOOTSWITCH jack to connect any commercially available foot controller.
Page 6
This effect is often used for guitar sounds and keyboards. In the ’70s, it was also extensively used for other instruments like electric pianos. The PMH2000 offers you four different phaser variations. Rotary Speaker: The simulation of a classic effect that is normally generated with a very heavy enclosure comprising (slow or fast) rotating speakers.
AC power cord. 4.3 Audio connections The in and outputs of your BEHRINGER PMH2000 are de- signed as unbalanced 1/4" mono jacks—except for the mono channel line inputs, which come as balanced 1/4" stereo jacks. Of course, all in and outputs work with both balanced and unbalanced connectors.
5. WIRING EXAMPLES Fig. 5.1: PMH2000 as stereo amplifier (example) Please set the MODE switch for this application! Fig. 5.2: PMH2000 as double mono amplifier (example) For this application, however, please set the MODE switch to “LEFT/RIGHT” Fig. 5.3: Standard setup (example) 5.
Ω Ω BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.